17mm 0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH33 Series Increased FPC retention force Small size 2.5mm 30 pos. Metal fittings (Leadless) Features Can be mounted over conductive traces. 1. Low-profile, small PCB mounting area Narrow width of only 2.5 mm reduced the board footprint by approximately 17% to 57%, as compared to several similar FH Series HRS connectors. 2. Various contact pitch (0.4mm, 0.5mm, 1mm pitch) available In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm pitch also available. 3. Increased FPC/FFC retention force No exposed contacts on the bottom of the connector In the horizontal direction: Approximately 2.0 times (compared to 0.5mm pitch FH12 series.) In the vertical direction: Approximately 1.7 times Simple operation (compared to 0.5mm pitch FH19 series.) q Open the actuator 4. Conductive traces on the PCB can run w Insert FPC under the connector No exposed contacts on the bottom of the connector. Actuator Actuator 5. One finger operation of the actuator 1 Proven (in several other Hiroses connectors) Flip- Lock rotating actuator assures reliable mechanical and electrical connection with FPC/FFC, confirming it with a definite tactile feel. 6. Easy FPC insertion and reliable electrical connection 2 Proven Flip Lock actuator allows easy insertion of FPC/FFC and provides a tactile sensation when fully FPCFPC closed, confirming complete electrical and mechanical connection. 7. Accepts standard FPC thickness Locked condition 0.3mm thick standard Flexible Printed Circuit (FPC) and e Close the actuator Flexible Flat Cable (FFC) can be used. r FPC connected 8. Board placement with automatic equipment 3 Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. 3 Standard reel packaging contains 5000 connectors. * 9. Halogen-free (FH33J Series) 4 *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 2013.11w 1 1.2mmFH33 Series0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Product Specifications Current rating 0.5 A Operating temperature range -55 to +85 (Note 1) Storage temperature range -10 to +50 (Note 2) (0.4mm pitch type 0.4A) Ratings Operating humidity range Relative humidity 90% max. Storage humidity range Relative humidity 90% max. (No Voltage rating 50 V AC (No condensation) condensation) (0.4mm pitch type 40V AC) Recommended FPC Thickness = 0.3 0.05mm gold plated (under 30 pos.), 0.3 0.03mm gold plated (over 31 pos.) Item Specification Conditions 1. Insulation resistance 500 M min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type) 50 m max. 3. Contact resistance 100 m max(0.4mm pitch type). 1 mA * Including FPC conductor resistance Contact resistance: 50 m max. 4. Durability 100 m max(0.4mm pitch type). 20 cycles (insertion/ withdrawal) No damage, cracks, or parts dislocation. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles No electrical discontinuity of 1s or more. 5. Vibration in each of the 3 directions. Contact resistance: 50 m max. 100 m max(0.4mm pitch type). 2 Acceleration of 981 m/s , 6 ms duration, sine half-wave 6. Shock No damage, cracks, or parts dislocation. waveform, 3 cycles in each of the 3 axis 7. Humidity 96 hours at 40 and humidity of 90% to 95%. Contact resistance: 50 m max. (Steady state) 100 m max(0.4mm pitch type). Temperature : -55/+15 to +35/+85/+15 to +35 Insulation resistance: 50 M min. 8. Temperature cycle Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes) No damage, cracks, or parts dislocation. 5 cycles Reflow : At the recommended temperature profile 9. Resistance to No deformation of components affecting performance. soldering heat Manual soldering: 350 10 for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Finish Remarks Color:Beige FH33 series PA Color:Deep brown LCP Color:Beige FH33J series PPS Color:Black Insulator UL94V-0 LCP Color:Beige FH33M series PA Color:Deep brown LCP Color:Beige FH33MHJ series PPS Color:Black Contacts Gold flash plated ----- Phosphor bronze Metalfittings Pure tin reflow plated ----- Ordering information ( ) ( ) FH 33 M H J - 12 6 S B - 1 SH 10 2 1 3 4 5 6 7 8 9 10 11 12 Series name:FH Blank:Width 3.0mm(standard) Standard type:Blank Contact pitch: 1 4 7 10 Series No:33 H:Width 3.5mm(long actuator type) Eccentric type:Number of 0.4mm,0.5mm,1mm 2 3 Blank:0.5mm pitch,1mm pitch 5 Blank:Standard contacts 11 SH:SMT horizontal mounting M:0.4mm pitch J:Halogen-free Contact alignment:S: single Plating specifications: 8 12 Flame retardance UL94V-0 Eccentric direction: Blank:Gold plated 9 6 Standard type:Number of contacts Blank:standard type (10)...Gold plating with nickel Eccentric type:Number of contacts B:Eccentric type barrier 5,000pieces/reel in 1mm housing (99)...Gold plating with nickel barrier 500pieces/reel 2