Product length : L=0.5(N-1)+2.5 *N : Number of positions 0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Height : 1.0mm Fig.1 Features Top/Bottom Contact 1. Low-profile With the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. Increased FPC/FFC retention As compared with existing similar construction connectors : * In horizontal direction : Approximately 2.6 times higher * In vertical direction : Approximately 2 times higher 3. Unique Back-Flip rotating actuator The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. Fig.2 4. Easy FPC insertion and reliable electrical connection FH34SRJ Differential Impedance Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. Delivered with the actuator open FPC/FPC can be immediately inserted without the need for the opening of the actuator. 6. Accepts standard FPC thickness 0.3mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low profile ZIF connector using standard FPC. 7. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. * 8.Halogen-free *As defined by IEC61249-2-21 Fig.3 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 9. Board placement with automatic Smooth FPC / FFC insertion equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. Fig.4 In cases where the application will demand a high level of reliability, such as automotive, 1 2017.5 please contact a company representative for further information. Depth : 3.8mm Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Product Specifications Operating temperature range : Storage temperature range : Current rating 0.5A (Note 1) -55 to +85C (Note 2) -10 to +50C (Note 3) Ratings Operating humidity range : Storage humidity range : Voltage rating 50Vrms AC Relative humidity 90% max. (No condensation) Relative humidity 90% max. (No condensation) Recommended FPC/FFC Thickness : 0.3 0.03 mm, Gold plated contact pads Item Specification Conditions 1. Insulation resistance 500M min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 250Vrms AC / 1 minute 100m max. 3. Contact resistance 1mA, AC / DC 20mV max (AC : 1kHz) * Including FPC and FFC conductor resistance Contact resistance : 100m max. 4. Durability 20cycles No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Frequency : 10 to 55 Hz, single amplitude of 0.75 5. Vibration Contact resistance : 100m max. mm, 10 cycles in each of the 3 axis No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer 2 Acceleration of 981m/s , 6 ms duration, sine half- 6. Shock Contact resistance : 100m max. wave, 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation Contact resistance : 100m max. 7. Humidity (Steady state) Insulation resistance : 50M min. 96 hours at 40C and humidity of 90 to 95% No damage, cracks, or parts dislocation Contact resistance : 100m max. Temperature : -55C / +15C to +35C / +85C / +15C to +35C 8. Temperature cycle Insulation resistance : 50M min. Time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles No damage, cracks, or parts dislocation Reflow : At the recommended temperature profile 9. Resistance to soldering heat No deformation of components affecting performance Manual soldering: 350C 10C for 5 seconds (Note 3) Note1 : When passing the current through all of the contacts, use 70% of the rated current. Note2 : Includes temperature rise caused by current flow. Note3 : The termstorag refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Materials / Finish Part Material Finish Remarks LCP Color : Gray UL94V-0 Insulator PA Color : Black LCP(8pos.) Contacts Phosphor bronze Gold plating with nickel barrier Metalfittings Phosphor bronze Pure tin reflow plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ( ) FH 34S RJ 30S 0.5 SH 50 Series name : FH Contact pitch : 0.5mm Termination type Series No. : 34S SH : SMT horizontal mounting type RJ Top and Bottom contact, halogen-free Specifications (Flame retardance UL94V-0). (50) Standard product 5,000 pcs/reel Number of Contacts : 4 to 50 (99) 500 pcs/reel 2 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.