0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector FH35C Series 3.2 mm in depth % .bb & & bb (* e c ( bb Features At Time of FPC Insertion 1. 0.3 mm pitch, Dual-sided connector This connector utilizes both a top and bottom contact and provides design flexibility. 2. Improved FPC retention force achieved through the use of our proprietary contact structure and a back flip actuator. FPC retention force (in the horizontal direction) is about 2.5 times greater than similar products produced by other companies. 3. Supports high speed transmissions By utilizing its excellent impedance characteristics, it is capable of supporting high speed transmissions. (Differential pairs of identical contacts allows for better transmission characteristics and eDP (ver1.3) and compatibility Lock Completion State to MIPI(DPHY) specifications.) 4. Delivered with actuator open To reduce installation time and costs, the actuator is delivered in the open position and eliminates the need to open the actuator before FPC insertion. 5. Easy FPC Insertion Equipped with tapered guides at the FPC insertions point, they help to create a smoother FPC insertion operation. 6. Compatible with 0.2mm thick FPC The FH35C was designed to be used with 0.2 mm FPC. (Using the appropriate FPC will prevent deformation and problems that may occur during the insertion and mating processes.) FH35C Differential Impedance 7. Bottom side protection 130ps rise time (20-80%) The bottom surface is over-molded and provides added protection to the contacts (no exposure). This allows the PCB space under the connector to be used for additional patterning. 8. Halogen Free Chlorine and bromine levels do not exceed the standard values as defined by IEC 61249-2-21. (Br: 900 ppm or less, Cl : 900 ppm or less, Br + Cl : 1,500 ppm or less) 9. Compatible with Automatic Mounting Tape-and-reel packaging is available for use with pick-and-place machines. Connectors are available on 5000 or 500 piece reels. (The outer diameter of an embossed reel is 180mm 2013.3 1FH35C Series0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector Product Specifications Operating temperature Range: 55 to +85C (Note 2) Storage temperature Range: -10 to +50C (Note 3) Current rating: 0.2 A (Note 1) Operating temperature Range: 90% or less of relative Storage temperature Range: 90% or less of relative Ratings Voltage rating: AC 30 Vrms humidity humidity (No dew condensation is allowed) (No dew condensation is allowed) With speci cations compatible with FPC contacts t = 0.2 0.03 gold plating Items Speci cations Conditions 1.Insulation Resistance No less than 50 M Measured at 100 V DC 2.Withstand Voltage No ashover or breakdown Conduct 90 V AC for one minute 100 m MAX. 3.Contact Resistance AC 20 mV MAX (1 KHz), 1 mA * Including FPC conductor resistance Contact resistance: no more than 100 m 4.Mating Cycles 10 times No breakage, cracks, or loosened parts No electric outage of 1 s or greater At the frequency of 10-55 Hz, half amplitude 0.75 mm, 5.Vibration Resistance Contact resistance: no more than 100 m and 10 cycles in each of three axial directions No breakage, cracks, or loosened parts 2 No electric outage of 1 s or greater Acceleration: 981 m/s 6.Shock Resistance Contact resistance: no more than 100 m Duration: 6 ms, sine half-wave, 3 cycles in each of the No breakage, cracks, or loosened parts 3 axis each in both directions Contact resistance: no more than 100 m 7. Humidity Resistance Left to stand for 96 hours at the temperature of 40C Insulation Resistance: 50 m or more (Steady State) and the humidity of 90% to 95% No breakage, cracks, or loosened parts Contact resistance: no more than 100 m Temperature:-55 +15 to+35 +85 +15 to +35C 8.Temperature Cycles Insulation Resistance: 50 m or more Time: 30 2 to 3 30 2 to 3 minutes No breakage, cracks, or loosened parts 5 cycles with the above conditions 9. Solder Heat No deformation in appearance or marked instability of Re ow: According to the Recommended Temperature Pro le Manual soldering: 350 10C for 5 1 sec. Resistance contacts (Note 1) Use at 70% of the current rating when all pins are energized with the stated current rating. (Note 2) Temperature rise at the time of electri cation is included. (Note 3) The term storage refers to the long-term storage condition of unused products before mounting on the PCB. The operating temperature and humidity ranges apply to non-energized state after PCB mounting. (Note 4) The above speci cations are representative of this series. Please refer to drawing for approval for of cial individual agreement. Materials Part Materials Treatment UL Regulation LCP Gray Insulator Recognition Polyamide resin Black Contact Phosphor bronze Nickel barrier Gold plating ------ Metal tting Phosphor bronze Pure tin re ow plating Product Number Structure Refer to the chart below when searching for the part number nomenclature. Please select connectors listed in this catalog when placing orders. The characteristics and specifications of the products described in this catalog are for reference only. Please make sure to check the latest delivery specifications before the time of purchase. (50) FH 35 C 35S 0.3 SHW Series Name: FH Contact Form SHW: SMT horizontal staggered array mount type Series No.: 35 C: dual-sided, halogen-free product Speci cations: Number of contacts : 9 to 51 (50): standard product (5000 connectors per reel) (99): 500 connectors per reel Contact Pitch: 0.3 mm 2