Ground contacts 2.5mm pitch Signal contacts 0.5mm pitch 0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine = heZZY hZg Va ciZg VXZ iZX cdad n dg e XijgZ igVchb hh dc Features 1. Accepts impedance matched shielded FFC Dimensions: 68 positions The FH41 Series is equipped with a ground terminal and 2.5mm can be used with impedance matched shielded FFC. 2. Impedance matched terminal design 38mm The signal terminal is designed for impedance control and is capable of handling high speed transmissions. 3. Highly reliable and secure structure The design of the FH41 series follows in the footsteps of another popular Hirose connector, the FH28 series. 6.2mm The FFC positioning mechanism and rugged structure combine to prevent accidental unlocking and produce (Mounting area) Fig.1 a secure connection. 4. Simplified operations with a flip lock system The flip lock design allows a smoother simpler FFC operation. It requires less force to rotate the actuator and delivers a tactile click to reinforce that the lock has secured the connection. 5. Suitable for automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (2,500 pcs/reel) 6. Halogen free All materials and substances used to produce this product comply with Halogen-free standards. * Standards by IEC 61249-2-21. Br : 900 ppm or lower, Cl : 900 ppm or lower, Br+Cl : 1,500 ppm or lower Fig.2 Uses the same FFC that the FH48 Series (vertical connection) uses. Shielded FFC Signal connection area FH41 and FH48 use the same FFC layout. FFC Ground contact connection area Fig.3 In cases where the application will demand a high level of reliability, such as automotive, 2019.4 please contact a company representative for further information.FH41 Series0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions Product Specifications Operating temperature range: Storage temperature range: 40 to +105 (Note 2) 10 to +50 (Note 3) Rated current 0.5A (Note 1) Rating Operating humidity range: Storage humidity range: Rated voltage AC 50Vrms Relative humidity of 90% or lower Relative humidity of 90% or lower (no dew condensation) (no dew condensation) Applicable FPC and FFC t= 0.3 0.05, gold plating (GND plate: t= 0.5 0.05, tin plating) terminal specifications Items Specifications Conditions 1. Insulation resistance Minimum of 500M Measured at DC 100V. 2. Withstanding voltage No flashover or insulation damage AC 150Vrms for 1 minute 3. Contact Maximum of 100m Measured at 1mA. resistance *Incl. FFC conductor resistance 4. Repeated motions Contact resistance : Maximum of 100m 20 mating cycles Durability No damaged, cracked or loose parts. No electrical discontinuity for more than 1s 5. Vibration Frequency 10 to 55Hz with half amplitude 0.75mm in 3 Contactresistance : Maximum of 100m resistance directions, 10 cycles each. No damaged, cracked or loose parts. No electrical discontinuity for more than 1s 2 6. Impact Acceleration : 981m/s , duration time : 6ms, with half sine Contact resistance : Maximum of 100m resistance waves in 3 directions, three times each. No damaged, cracked or loose parts. Contact resistance : Maximum of 100m 7. Humidity resistance Insulation resistance : Minimum of 50M Left for 96 hours at temperature 40, humidity 90 to 95% in ordinary conditions No damaged, cracked or loose parts. Contact resistance : Maximum of 100m Temperature : 40 +15 to +35 +105 +15 to +35 8. Temperature Insulation resistance : Minimum of 50M Time : 30 2 to 3 30 2 to 3 min. cycle No damaged, cracked or loose parts. 5 cycles in the above conditions 9. Solder heat No deformation of components or no Reflow : Recommended temperature profile resistance significant looseness of contacts, etc. Manual soldering : 350 5 for 5 sec. Note 1 : When energizing rated current to all contacts, use 70% of rated current. Note 2 : Includes temperature rise caused by current flow. Note 3 : The termstorag here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials / Finish Parts Materials Color/Finish Remarks Gray Insulating parts LCP UL94V-0 Black Gold plating Terminal Phosphor bronze Pure tin reflow plating Metal parts Phosphor bronze (plating material) Product number structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ( ) FH 41 50S 0.5 SH 05 qw e r t y Terminal shape qSeries name : FH t SHSMT horizontal implementation type wSeries number : 41 Plating specifications : y Number of contacts : 15 to 68 e (05)Gold plating (Except 50, 68 contacts) Contact pitch : 0.5mm (28)Gold plating (50, 68 contacts) r