0.2 mm Pitch, 0.9 mm Height FPC Connectors FH43B Series The staggered lead structure simplifies PCB mounting and provides a low profile height of 0.9 mm and a 2.77 mm mounting width depth. Fig 1. Features FH43B differential impedance 1. 0.2 mm pitch low profile bottom contact FPC connector Spec MAX : 115ohm Maximizes space with contact pitch of 0.2 mm, a mated height of 0.9 mm, and mounted depth of 2.77 mm. 97.2 100.6 *45% reduction in occupied PCB area *55% reduction in weight (Compared to our 0.3 mm pitch FH26 Series 51 position connector) 2. Easy PCB mounting Connector FPC The PCB leads use 0.4 mm pitch and are staggered Spec MIN : 85ohm which simplifies the PCB mounting process. 3. Supports high-speed transmissions By utilizing differential pairs of identical contacts impedance 200ps rise time(10-90%) (even even contact or odd - odd contacts) these connectors are able to provide superb transmission characteristics and supports eDP (ver. 1.3), MIPI FPC inserFPC inserttionion (D-PHY), HDMI (ver 1.3), and USB (3.0) standards. Actuator open 4. Molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects the contacts and removes any restrictions from PCB patterning and layout design. 5. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force, and a clear tactile click is delivered upon the successful completion of the FPC mating process. 6. Easy FPC insertion The FPC aligning mechanism holds onto the FPC With actuator locWith actuator lockkeded prior to locking the actuator. 7. Insertion check window There is a cutout on the actuator that allows you to visually inspect the FPC to make sure that it is locked into place, preventing incorrect insertion of the FPC. 8. Accepts standard 0.2 mm thick FPC This connector accepts standard 0.2 mm thick FPC. (A stiffener with adequate strength will prevent FPC deformation and ease insertion and mating.) 9. Halogen-free available (FH43BW Series) The connector does not use chlorine and bromine exceeding standard limits. (FH43BW Series) FPC temporary *Defined in accordance with IEC61249-2-21 Br 900ppm or lower, Cl 900ppm or lower, Br + Cl retention system 1,500ppm or lower 10.Available for 500 pieces packaging Although the normal product is 5,000 pieces per reel, 500 winds per reel is also available. FPC temporary visual check area (Emboss reel external diameter is 180mm.) retention system to confirm mating 1 2014.3w May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.FH43B Series0.2 mm Pitch, 0.9 mm Height FPC Connectors Product Speci cations Current DC 0.2 A Operating Storage Temperature -55 to +85 (Note 2) -10 to +50 (Note 3) Rating (Note 1) Temperature Range Range Voltage Operating Relative humidity 90% max Storing Humidity Relative humidity 90% max AC 30 Vrms Rating Humidity Range (should be no condensation) Range (should be no condensation) Recommended FPC spec t 0.2 0.02 Gold plating Items Speci cations Conditions 1. Insulation Resistance 50 M Min 100 V DC 2. Withstanding Voltage No ashover or breakdown 90 V AC for 1 Min 100 m Max. 3. Contact Resistance 1 mA *Excluding FPC conductor resistance Contact Resistance: 100 m Max 4. Durability 10 cycles No damage, cracks and looseness of parts No electrical discontinuity of 1 or longer Frequency 10 to 55Hz, Half amplitude 0.75 mm 5. Vibration Contact Resistance: 100 m Max for 10 cycles in 3 axial directions No damage, cracks and looseness of parts No electric discontinuity of 1 or longer 2 Acceleration: 981 m/s , Retention time: 6 ms, Semi- 6. Shock Contact Resistance: 100 m Max sinusoidal 3 times in 3 both axial directions No damage, cracks and looseness of parts Contact Resistance: 100 m Max 7. Humidity Insulation Resistance: 50 M Min 96 hours at 40 and humidity of 90 to 95% (Steady State) No damage, cracks and looseness of parts Contact Resistance: 100 m Max Temperature: -55 +15 to +35 +85 +15 to +35 8. Temperature Cycle Insulation Resistance: 50 M Min Time: 30 2 to 3 30 2 to 3 minutes No damage, cracks and looseness of parts 5 cycles 9. Resistance to No deformation of case of excessive 1) Reflow: Peak TMP 250 MAX, reflow TMP over 230 within 60 seconds soldering heat looseness of the terminal 2) Manual soldering: 350 10 for 5 seconds (Note 1) When electrifying rated current to all contacts, use 70% of rated current. (Note 2) Includes temperature rise caused by current ow. (Note 3) The term storage refers to the long-term storage condition of unused products before PCB mounting. For no-electri cation state after PCB mounting, the operating temperature and humidity are applied. Materials Product Materials Color/Finish Remarks LCP Beige UL94V-0 Insulator FH43B Series: Deep brown PA FH43BW Series: Black UL94HB Contacts Gold plating Phosphor bronze Metal ttings Pure tin re ow plating Product Number Structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. ( ) FH 43B W 51S 0.2 SHW 10 Series Name: FH Terminal Type ... Series No.: 43B SHW SMT horizontal staggered row mounting type Blank: Standard Speci cations W: Halogen-free product (10): Nickel barrier gold plating, 5,000 No. of Contacts: 21~71 pieces per reel Contact Pitch: 0.2 mm (99): Nickel barrier gold plating 500 pieces per reel 2 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.