0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator Features Extended metal fitting option (FH52E/FH52K/FH52T) 1. Highl y reliable connection and robust structure With the need for higher contact counts and the need for a connector body that delivers unquestionable strength and a reliable connection in a FPC/FFC connector, the FH52 series has made great strides to meet this need. It meets this need with the following: -An FPC positioning mechanism that delivers the high reliability requested -A reliable and secure connection that is packed into a well-designed, durable structure. 2. Product variations capable of meeting a range of needs FH52E : Long metal fittings type Easy visual inspection of solder posts after processing. The metal fittings extend out from the connector body to FH52K : Long metal fittings type, 125 Heat Resistant Type enable a visual inspection of its soldering conditions. 12 5 heat resistant connector meets severe automotive requirements FH52T : Long metal fittings type, 2-Point Contact Type Contact structure with independent springs connects with 22-P-Points of Contact (FH52T)oints of Contact (FH52T) FPC/FCC at 2 points reducing failure from dust intrusion. 3. Simplified operations The flip lock structure makes it easier to engage/ disengage the actuator and reduces the required force needed to operate. A clear tactile click is delivered upon the successful completion of the mating process. 4. Increased retention force The side catch technology combined with tabbed FPC/FFC increase the horizontal retention force of the FPC/FFC. 5. Accepts standard 0.3mm thick FPC/FFC It accepts 0.3mm thick products that are easy to 2-point contact structure with independent springs to manufacture and have superb insertion performance. improve reliability. 6. Fully molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects the contacts and removes Side catch technology designed to place a temporSide catch technology designed to place a temporarary y any restrictions from PCB patterning and design. hhold on the FPC/FFC befold on the FPC/FFC before the locore the lock is engaged.k is engaged. 7. Halogen-free All materials and substances used to produce this product comply with Halogen-free standards.* As defined in IEC 61249-2-21. Br : 900 ppm or less, Cl : 900 ppm or less, Br+Cl : 1,500 ppm or less 8. Supports automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (3,000pcs/reel) 9. Multiple packing options The standard packaging is 3,000pcs/reel, but it is also FPC/FFC with tab increase the offered in a 500pcs/reel. (The outer diameter of the reel retention force in horizontal direction. will be 180mm in this case.) 2016.5w 1 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.FH52 Series0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors Product Specifications Operating temperature range : -40 to +105C (Note 2)(Note 4) Storage temperature range : -10 to +50C (Note 3) Rated current 0.5A (Note 1) Rating Operating humidity range : Relative humidity 90% max. Storage humidity range : Relative humidity 90% max. Rated voltage 50V AC rms (No condensation) (No condensation) Adaptive FPC/FFC Thickness: = 0.3 0.05mm Gold plated contact traces contact specifications Item Specification Conditions 1. Insulation resistance 500M min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 150V AC rms / 1 minute 3. Contact 50m max. 1mA (DC or 1000Hz) resistance * Including FPC/FFC conductor resistance 4. Durability Contact resistance : 50m max. 20 cycles (insertion / withdrawal) No damage, cracks, or parts dislocation No electrical discontinuity of 1s or more Frequency : 10 to 55Hz, single amplitude of 0.75mm, 5. Vibration Contact resistance : 50m max. 10 cycles in each of the 3 directions No damage, cracks, or parts dislocation No electrical discontinuity of 1s or more 2 Acceleration of 981m/s , duration of 6 ms, sine half-wave 6. Shock Contact resistance : 50m max. waveform, 3 cycles in each of the 3 axes No damage, cracks, or parts dislocation Contact resistance : 50m max. 7. Humidity 96 hours at temperature of 40 and humidity of 90% to Insulation resistance : 50M min. (Steady state) 95% No damage, cracks, or parts dislocation Contact resistance : 50m max. Temperature : -40C / +15 to +35 / +105(Note 4) / +15 to +35 8. Temperature Insulation resistance : 50M min. Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes) cycle No damage, cracks, or parts dislocation 5 cycles 9. Resistance to No deformation of components affecting Reflow : Peak temperature 250C max., 230C or more, 30 seconds or less soldering heat performance Manual soldering: 350 10C for 5 seconds Note 1 : When passing the current through all of the contacts, use 70% of the current rating. Note 2 : Includes temperature rise caused by current flow. Note 3 : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 4 : FH52K withstands up to +125C. Materials / Finish Part Material Finish Remarks Color : Grey Insulator LCP UL94V-0 Color : Black Contacts Copper alloy Partially gold plated Metal fittings Brass Tine plated Product Number Structure Refer to the chart below when datermining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ( ) ( ) FH 52 E 50 25 S B 0.5 SH 99 we r t y u i o 0 q Series name : FH y Contact arrangement : Single (pole piece array) w Series No. : 52 u Alternating direction : No symbol : Standard type (all contacts loaded) e Blank : Standard type A : Alternating contact type (Alternating on the polarity side) E : Long metal fittings type B : Alternating contact type (Alternating on the opposite polarity side) K : Long metal fittings type, +125C Heat Resistant type T : Long metal fittings type, 2-Point Contact type i Contact pitch : 0.5mm, 1mm r Standard type : Number of contacts o Termination type Alternating contact type : Mold size SH : SMT horizontal mounting type t Standard type : No symbol 00 SpecificationBlank : Partially gold plated, 3,000pcs/reel (99) : Partially gold plated, 500pcs/reel Alternating contact type : Number of contacts 2 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.