21.94mm 0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm Insert FPC/FFC without opening 5.15mm the lock lever before insertion Fig.1 Two-point contact design for dust prevention Features 1. Automatic single action locking design Single action locking by simply inserting FPC after mounting contributes to enhanced workability. (Fig.1) (Lock release by operating the lock lever when removing.) Operation of the lock lever is not required at the time of mating FPC. Can be inserted with one hand. Contributes to reduced assembly time. The lock lever will not be damaged by operation. Fig.2 Mating failure is reduced by eliminating the need to operate a lever while mating. Supports FPC/FFC/Shield FFC 2. Two-points of contact prevents contact failure by dust High contact reliability by independent spring two-point contact design, preventing contact failure by dust. (Fig.2) 3. Supports FPC/FFC/Shield FFC FH63 allows you to choose from FPC/FFC/Shield FFC. Shielded FFC is acceptable for EMI prevention. (Fig.3) 4. High FPC retention force The circuit is automatically locked after FPC/FFC is inserted by a single action. The notches on both sides of FPC are FPC FFC Shield FFC held by the lock lever, generating a high FPC retention force in spite of the small contact. (Fig.4) Shielded FFC is acceptable for EMI prevention. 5. Visual inspection on the mated status of FPC/FFC is possible. GND contact As the notches on both sides of FPC can be checked from the top surface after inserting FPC/FFC, insufficient insertion during assembly is prevented. (Fig.5) 6. Environmental Halogen free Shield FFC *AS defined by IEC 61249-2-21. GND contact and FFC GND plate Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm contact at multiple points. Fig.3 max FPC/FFC can be checked from the top surface after mating. High FPC retention force OK NG Robust lock firmly retains FPC/FFC. Fig.5 Fig.4 In cases where the application will demand a high level of reliability, such as automotive, 1 2017.8 please contact a company representative for further information. Feb.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FH63 Series0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector Product Specifications Operating temperature range : -55 to +105C (Note 1) Storage temperature range : -10 to +60C (Note 2) Rated current 0.5A Rating Operating humidity range : Relative humidity 90% max. Storage humidity range : Relative humidity 90% max. Rated voltage 50V AC/DC rms (No condensation) (No condensation) Adaptive FPC Thickness : = 0.33 0.03mm Signal layout : Gold plated, GND plate : Tin plated contact specifications Item Specification Conditions 1. Insulation resistance 500M min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 150V AC rms / 1 minute 3. Contact 100m max. 1mA AC resistance * Including FPC/FFC conductor resistance 4. Durability Contact resistance : 100m max. 10 cycles (insertion / withdrawal) No damage, cracks, or parts dislocation No electrical discontinuity of 1s or more Frequency : 10 to 55Hz, single amplitude of 0.75mm, 5. Vibration Contact resistance : 100m max. 10 cycles in each of the 3 directions No damage, cracks, or parts dislocation No electrical discontinuity of 1s or more 2 Acceleration of 981m/s , duration of 6 ms, sine half-wave 6. Shock Contact resistance : 100m max. waveform, 3 cycles in each of the 3 axes No damage, cracks, or parts dislocation Contact resistance : 100m max. 7. Damp heat 96 hours at temperature of 60 and humidity of 90% to Insulation resistance : 50M min. (Steady state) 95% No damage, cracks, or parts dislocation Contact resistance : 100m max. Temperature : -55C / +15 to +35 / +105 / +15 to +35 8. Temperature Insulation resistance : 50M min. Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes) cycle No damage, cracks, or parts dislocation 5 cycles 9. Resistance to No deformation of components affecting Reflow : Recommended Temperature Profile soldering heat performance Manual soldering: 350 10C for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Part Materials Finish UL standard LCP Grey UL94V-0 Insulator LCP Black UL94V-0 Signal contact Copper alloy Nickel barrier gold plated --------------- Grounding contact Copper alloy Pure tin reflow plated --------------- Reinforcing metal tabs SUS Pure tin reflow plated --------------- Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 63 30S 0.5 SH (99) Series name : FH Terminal type SH SMT horizontal mounting type Series No. : 63 No. of contacts : 30 Specification Contact pitch : 0.5mm Blank : Standard 3,500pcs/reel (99) : 500pcs/reel 2 Feb.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved.