6.7mm 34pos. 0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector FH72 Series Dimension Diagram : 11pos. 0.9mm 3.5mm 0.7mm width 0.4mm guide Fig.1 Features One Action Lock Before mating 1. Space-saving design Space saving design with 0.3mm pitch, 4.0mm width, 0.9mm height (Fig.1). 2. Automatic one action lock design One action locking by simply inserting FPC after mounting contributes to enhanced workability (Fig.2). (Lock release by operating the lock lever when removing.) Operation of the actuator is not required at the time of FPC mating. Can be inserted with one hand. Contributes to assembly time reduction. Lock lever will not be damaged by operation. Fig.2 Eliminates failures due to FPC movement during locking. High FPC retention force due to lock design 3. High FPC retention force FPC being inserted The notches on both sides of FPC are held by the lock lever, generating a high FPC retention force in spite of the small size (Fig.3). FPC inserted 4. Easy FPC insertion Wide guide for easy FPC insertion (Fig.1). 5. Compatible with 0.2mm thickness FPC 3mm pitch connector compatible with 0.2mm standard thickness FPC (Appropriate rigidness of metal plates prevents FPC deformation and issues during inserting Fig.3 and fitting). 6. Detect FPC Mis-Mating with Original FPC mis-mating detection Structure Can detect mis-mating by checking the FPC insertion status with FPC pattern (Fig.4). 7. Environmental Halogen free *AS defined by IEC 61249-2-21. Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm max OK NG Fig.4 In cases where the application will demand a high level of reliability, such as automotive, 1 2019.7 please contact a company representative for further information. NEWFH72 Series 0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Product Specifications Storage Rated Operating 0.2A -55 to +85C (Note 1) Temperature -10 to +50C (Note 2) current temperature range range Rating Rated Operating Relative humidity 90% Storage humidity Relative humidity 90% 30V AC/DC voltage humidity range max. (No condensation) range max. (No condensation) Adaptive FPC/FFC Thickness : = 0.20.03mm Gold plated contact traces contact specifications Item Specification Conditions 1. Insulation resistance 50M min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 90V AC rms / 1minute 100m max. 3. Contact resistance 1mA (AC) * Including FPC conductor resistance 4. Durability Contact resistance : 100m max. 10 cycles (insertion/withdrawal) No damage, cracks, or parts dislocation No electrical discontinuity of 1s or more Frequency : 5. Vibration Contact resistance : 100m max. 10 to 55Hz, single amplitude of 0.75mm, No damage, cracks, or parts dislocation 10 cycles in each of the 3 directions 2 No electrical discontinuity of 1s or more Acceleration of 981m/s , duration of 6ms, sine 6. Shock Contact resistance : 100m max. half-wave waveform, 3 cycles in each of the 3 No damage, cracks, or parts dislocation axes Contact resistance : 100m max. 7. Humidity 96 hours at temperature of 40C and humidity Insulation resistance : 50M min. (Steady state) of 90% to 95% No damage, cracks, or parts dislocation Temperature : Contact resistance : 100m max. -55C +15C to +35C +85C 8. Temperature cycle Insulation resistance : 50M min. +15C to +35C No damage, cracks, or parts dislocation Time : 30 2 3 30 2 to 3 (Minutes) 5 cycles Reflow : See recommended temperature profile 9. Resistance to soldiering No deformation of components affecting (Page 8) heat performance Manual soldering : 350 10C for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Part Material Color / Finish UL standard LCP Beige UL94V-0 Insulator Polyamide Black UL94V-0 Contact Copper alloy Gold plated Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 72 11S 0.3 SHW (99) Series Name FH Terminal type SHW : SMT horizontal staggered array type Series No. 72 No. of contacts 11 Specification Connector pitch 0.3mm Blank : Standard 6,000pcs/reel (99) : 500pcs/reel 2