FX20-100S-0.5SH Hirose

0.5mm Pitch, Board to Board Connector with Floating Structure FX20 Series X direction Y direction Floating range Floating range :0.6mm :0.6 0.8mm Features Enlarged view of the contact area 1. 0.5mm pitch 2. Connection type: Right angle / Vertical Receptacle-side contact 3. Pin counts : 20, 40, 60, 80, 100, 120 and 140 4. Floating range : 0.6 to 0.8mm in the X direction and 0.6mm in the Y direction 5. A double beam contact structure produces a highly reliable contact (Refer to the figure on the right) 6. Current capacity : 0.5A per pin 7. Effective mating length of 1.5mm This connector utilizes a 1.5mm effective mating length for signal contacts and provides a sufficient margin for its mating stroke. Header-side contact 8. No conductive trace surface is not specified 9. Contains the vacuum pick up area needed to allow automatic mounting 10. Self-aligning and self-guiding structure Built-in guide posts enable self-alignment and ensure a secure connection Stacking height chart Header FX20-**P-0.5SV15 FX20-**P-0.5SV20 Receptacle FX20-**S-0.5SV h=15mm h=20mm FX20- S-0.5SV10 h=25mm h=30mm ** FX20-**S-0.5SH Right angle connection Right angle connection X direction 0.6mm 0.8mm Floating range Y direction 0.6mm 0.6mm FX20-**S-0.5SV10 FX20-**S-0.5SH FX20-**S-0.5SV h=15mm h=20mm h=25mm h=30mm Right angle Right angle FX20-**P-0.5SV15 connection connection FX20-**P-0.5SV20 In cases where the application will demand a high level of reliability, such as automotive, 1 2018.7 please contact a company representative for further information.FX20 Series0.5mm Pitch, Board to Board Connector with Floating Structure Product Speci cations Rated current 0.5A Operating temperature range : -55 to 85C (Note 1) Ratings Rated voltage AC 50V Storage temperature range : -10 to 60C (Note 2) Item Standards Condition 1. Contact resistance 70m max. 100mA(DC or 1000Hz) 2. Insulation resistance 100M min. 100V DC. 3. Voltage proof No ashover or breakdown. 150V AC for 1 min. Contact resistance : Variation from initial 4. Mechanical operation value 20m or less. 50 times insertions and extractions. No damage, crack and looseness of parts. Frequency : 10 to 55 to 10Hz, approx 5 min 5. Vibration Single amplitude : 0.75mm, 10 cycles for 3 axial directions. No electrical discontinuity of 1s. 2 No damage, crack and looseness of parts. 490m/s , duration of pulse 11ms 6. Shock at 3 times for 3 both axial directions. 7. Damp heat Contact resistance : Variation from initial Exposed at 402C, 90~95%, 96h. (Steady state) value 20m or less. Insulation resistance : 100M min. Temperature : -55 +85C 8. Rapid change of No damage, crack and looseness of parts. Time : 30 30 min. temperature Under 5 cycles(relocation time to chamber : within 2~3min) Note 1 : Includes temperature rise caused by current ow. Note 2 : The termstorag here refers to products stored for a long period prior to board mounting and use. Materials / Finish Part Material Finish UL standard Header PA Black UL94V-0 Insulator Receptacle LCP Black UL94V-0 Header Copper alloy Contact area: Gold plated Contacts ---------------------- Receptacle Phosphor bronze Mounting area: Gold plated Metal Fitting Brass Tin plated ---------------------- Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Straight receptacle FX20 60 S 0.5 SV 10 Straight header FX20 60 P 0.5 SV 15 Right angle receptacle FX20 60 S 0.5 SH Series name FX20 Number (contacts) : Connector type S : Receptacle type P : Header type Contact pitch 0.5mm Housing con guration SV : Straight type SH : Right angle type Stacking height type Mating height mm = Height of the receptacle-side + Height of the header-side 2