2.4mm coaxial connectors for frequency test measurements 2.4mm Series Features 1. Complies with MIL-STD-348B Standard 2. Supports up to 50GHz frequency 3. Screw mounting Provides excellent high frequency performance and consistent mounting quality Reusable Reduces mounting complexity (No Soldering is required) 4. Flexible PCB thickness 5. 0.085 inch flexible cable applicable 6. RoHS2 compliant Applications Data transmission measurement, Radio communication equipment, Measuring instruments, RF module, Radio power amplifier, High speed router, High speed switch etc. Functional diagram Plug side Receptacle side Straight plug PCB vertical launch receptacle H2.4-P-SS085 (For high-speed test board applications.) H2.4-R-SR2-1 Attenuator PCB end launch receptacle Plug Jack (For high-speed test board applications.) H2.4-LR-SR2 H2.4-AT (**)-PJ ** 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20dB In cases where the application will demand a high level of reliability, such as automotive, 1 2019.4 please contact a company representative for further information.2.4mm Series 2.4mm coaxial connectors for frequency test measurements Product Speci cations Nominal characteristic Operating Temperature 50 -55 to +105 (95% RH or less) impedance Range Ratings Storage Temperature Rated frequency 0 to 50GHz -55 to +50 (95% RH or less) Range Items Specifications Conditions Center : Not greater than 4m 1. Contact resistance Measured at 100mA or below External : Not greater than 2m Not less than 1,500M (H2.4-P-SS085) 2. Insulation resistance Measured at 500V DC Not less than 5,000M (H2.4-R-SR2-1) 3. Withstanding voltage No flashover or breakdown 500V AC for one minute H2.4-P-SS085 H2.4-R-SR2-1 H2.4-LR-SR2 V.S.W.R. : Not greater than 1.35 (0 to 40GHz) V.S.W.R. : Not greater than 1.35 (0 to 26.5GHz) V.S.W.R. : Not greater than 1.3 (0 to 40GHz) 4. Voltage standing wave ratio V.S.W.R. : Not greater than 1.45 (40GHz to 50GHz) V.S.W.R. : Not greater than 1.4 (26.5GHz to 40GHz) V.S.W.R. : Not greater than 1.4 (40GHz to 50GHz) V.S.W.R. : Not greater than 1.45 (40GHz to 50GHz) Contact resistance at center : Not greater than 6m 5. Mating Cycles External : Less than 4m 500 cycles No broken, cracked, or loose parts No electrical discontinuity for not less Frequency : 10 to 2000Hz, half amplitude : 0.75mm, 6. Vibration resistance than 1s. 2 Acceleration : 196m/s , 10 cycles in each of the 3 axis No broken, cracked, or loose parts No electrical discontinuity for not less 2 Acceleration : 980m/s , duration : 6ms, 7. Shock resistance than 1s. Wave form : half-sine wave, 3 times in each of the 3 axis No broken, cracked, or loose parts Insulation resistance : Not less than 100M 8. Moisture resistance of (in high humidity environment) Left for 10 cycles (240 hours) in an environment with the temperature/humidity Insulation resistance : Not less than 500M temperature ranging from -10 to 65C and the humidity cycle (in dry environment) ranging from 90 to 98%. No broken, cracked or loose parts 5 cycles of the following test series condition : 9. Temperature cycle No broken, cracked or loose parts Temperature : 55 +105 Time : 30 min. 3 min. 30 min. 3 min. 10. Salt spray No considerable corrosion Continuous 48 hour cycle in 5% salt water solution *Measurement of voltage standing wave ratio (V.S.W.R.) The specified values of the voltage standing wave ratio (V.S.W.R.) noted above, are taken with the test set up shown in the figure below : Network Analyzer H2.4-P-SS085 measurement system D.U.T. details D.U.T. H2.4-P-SS085 with double ended harness Test Port Cable H2.4-R-SR2-1 measurement system H2.4-LR-SR2 measurement system D.U.T. details D.U.T. details H2.4-R-SR2-1 H2.4-R-SR2-1 H2.4-LR-SR2 H2.4-LR-SR2 Test boards Materials / Finish Part Materials Finish Shell Stainless steel / Brass Passivated / Nickel plating Insulator PTFE resin / PEI resin --------------- Contact Beryllium copper Gold plating Ring Stainless steel Gold plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. H2.4 - - Series name : H2.4 Applicable cable or board mounting style SS085 : 0.085-inch, Flexible cable Connector type SR : PCB screw-mounting P : Straight plug R : Receptacle 2