The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Staggered Connector Directly Mounted on Board HIF2C Series Features 1. Directly Mounted on Board This connector can be directly mounted on the board using 1.27mm pitch flat cable. 2. Variation in Number of Contacts The number of contacts contains 10, 16, 20, 26, 30, 34, 40, 50, and 60 contacts. 3. Low Profile Type The connector height is lower than that of the HIF2E series. 4. Applicable Cable The applicable cable is UL2651 AWG 28 flat cable (7 cores./0.127mm, jacket dia. :0.8 to 1.0mm). Applications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. Product Specifications Current rating: 1A Operating Temperature Range:55 to +85 (Note 1) Storage Temperature Range:10 to +60(Note 2) Rating Voltage rating: 200V AC Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% (Note 2) Item Specification Condition 500V DC 1. Insulation Resistance 1000M ohms min. 650V AC/1 minute 2. Withstanding voltage No flashover or insulation breakdown. 0.1A 3. Contact Resistance 15m ohms max. 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1s or more 5. Humidity (Steady state) 96 hours at temperature of 40 and humidity of 90% to 95% Insulation resistance: 1000M ohms min. (65: 30 minutes 15 to 35: 5 minutes max. 6. Temperature Cycle No damage, cracks, or parts looseness. 125: 30 minutes 15 to 35: 5 minutes max.) 5 cycles 7. Resistance to Solder Bath: 260 for 10 seconds No deformation of components affecting performance. Soldering heat Manual soldering: 360 for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Contact area Gold plated over nickel underplated --------------- Contact Beryllium copper Ordering Information HIF2C - * DT - 1.27 R 1 2 3 4 5 Series Name: HIF 2C Contact Pitch: 1.27mm 1 4 Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60 Connection type : R : ribbon cable 2 5 Contact alignment: DT : staggered 3 B65 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF2C SeriesStaggered Connector Directly Mounted on Board Part Number CL No. Number of Contacts A B RoHS ( ) HIF2C-10DT-1.27R 01 561-0075-0-01 10 17.8 11.43 ( ) HIF2C-16DT-1.27R 01 561-0077-6-01 16 25.4 19.05 HIF2C-20DT-1.27R(01) 561-0079-1-01 20 30.5 24.13 HIF2C-26DT-1.27R(01) 561-0081-3-01 26 38.1 31.75 HIF2C-30DT-1.27R(01) 561-0083-9-01 30 43.2 36.83 YES ( ) HIF2C-34DT-1.27R 01 561-0085-4-01 34 48.3 41.91 ( ) HIF2C-40DT-1.27R 01 561-0087-0-01 40 55.9 49.53 ( ) HIF2C-50DT-1.27R 01 561-0089-5-01 50 68.6 62.23 HIF2C-60DT-1.27R(01) 561-0091-7-01 60 81.3 74.93 B66 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.