HIF3-26CV(72) Hirose

Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide applications. 2. UL Approval Product HIF3B series connectors are UL approved. 3. Mechanism to Prevent Mis-insertion This connector is equipped with the mechanism to prevent Mis- insertion as follows. 1 The system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (MIL standard). 2 The system embeds and guides the polarizing key in the socket holes. 4. Applicable Cable AWG 28 The applicable cable is UL2651 AWG 28 flat cable (7 cores./ 0.127mm, jacket dia. 0.90.1mm). Product Specifications ( ) ( ) Current rating : 1A Operating Temperature Range : 55 to +85 Note 1 Storage Temperature Range : 10 to +60 Note 2 Rating ( ) Voltage rating : 200V AC Operating Moisture Range : 40 to 80% Storage Humidity Range : 40 to 70% Note 2 Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% (-55: 30 minutes 15 to 35: 5 minutes max. 6. Temperature Cycle No damage, cracks, or parts looseness. 125: 30 minutes 15 to 35: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 15m ohms max. 500 cycles Solder bath: 260 for 10 seconds 8. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 360 for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Socket Contact Beryllium copper Connection area Gold plated Pin header contact Brass Selective Gold plated B15 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.HIF3B Series Ribbon Cable connector Compliant with MIL Standard Ordering Information Socket HIF 3B - * D - 2.54 R qw etr y q Series Name : HIF ( ) w Series No. : 3B, 3BA, 3BB 50, 60, 64 contacts only e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r Contact alignment : D : Double t Contact pitch : 2.54mm y Connection type R : ID type Pin Header HIF 3B - * P A - 2.54 DS qw etr y u q Series Name : HIF w Series No. : 3B : (14 contacts not included) 3BC: (10 contacts only) 3BA, 3BB: (50, 60, 64 contacts only) 3BD: (10 contacts only) e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r P : Pin header t A : Selective gold plated y Contact pitch : 2.54mm u Contact style DS : Right angle type DSA : Straight type B16 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.