1.27mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series HIF2 Series (MIL-C-83503) (Board direct mount type) 1 2 HIF5 Series FD Series (Card edge type) (D sub-ribbon connector) Features 1. Product Variation The connection method is available with the board to board type and insulation displacement type. Fig.1 (For further information, refer to catalog page B86.) 2. Broad applications HIF2E, HIF3B and HIF5 can be combined one other, because the 1.27mm pitch flat cable is used. (Fig.1) 3. Applicable Cables The applicable cable is a (UL2651) 28 AWG flat cable (7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm) 4. Mis-insertion Preventive Structure The mis-insertion preventive guide prevents mis- insertion. Product Specifications Current rating : 0.5A Operating Temperature Range : -55 to +85 (Note 1) Storage Temperature Range : -10 to +60 (Note 2) Rating Voltage rating : 125V AC Operating Humidity Range : 40 to 80% Operating Humidity Range : 40 to 70% (Note 2) Item Specification Condition 1.Insulation Resistance 1000M min. 250V DC 2.Withstanding Voltage 300V AC/1 minute. No flashover or insulation breakdown. 3.Contact Resistance 0.1A 30m max. 4.Vibration Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1s or more 5.Humidity (Steady state) 96 hours at temperature of 40 and humidity of 90% to 95% Insulation resistance : 1000M min. (-65 : 30 minutes15 to 35 : 5 minutes max. 6.Temperature Cycle No damage, cracks, or parts looseness. 125 : 30 minutes15 to 35 : 5 minutes max.) 5 cycles 7.Durability (Mating/un-mating) 500 cycles Contact resistance : 30m max. Solder bath : 260 for 10 seconds 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering : 360 for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3 : Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. B69 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.HIF6 Series1.27mm Pitch Two-Piece Connectors Materials / Finish Parts Material Finish Remarks Insulator PBT Black UL94V-0 Socket Contact Copper alloy Selective gold plating Pin header Contact Brass Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Socket and Receptacle HIF6 A * D A 1.27 DSA L qwtery u i q Series Name : HIF6 w Blank : Ribbon cable insulation displacement type A : Without board mounting hole B : With board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r D : Socket or receptacle t A : Selective gold plated y Contact pitch : 1.27mm u Contact type : DS : Right angle type DSA : Straight type R : Ribbon cable ID type i L : Board pre-fixed lock pin Pin Header HIF6 A * P A 1.27 DSA L qwteryu i q Series Name : HIF6 w Blank : With lock A : Without board mounting hole B : With board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r P : Pin header t A : Selective gold plated y Contact pitch : 1.27mm u Contact style : DS : Right angle type DSA : Straight type i L : Board pre-fixed lock pin B70 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.