H/MS3106A10SL-3S(73) Hirose

Circular Connectors Supporting TV and MIL spec. H/MS Series Features 1. Compatib le with MIL spec. standard products 2. A ground circuit is provided in the TV approved connectors 3. Waterproof The mated plug/receptacle combinations and un-mated receptacles are compliant to IP67F and IP68F ratings. IP67: Left in water at a depth of 1 m for 30 minutes IP68: Left in water at a depth of 2 m for 14 days Product Speci cations Standard products Shell size 10SL 18 20 22 24 Contact arrangement 4 3 10 15 29 14 22 23 10 Number of contacts 2347 17 19 487 Rated current (A)/contact 13 13 23 23 13 13A 46 23 46 The gure in indicates the total 24.5 34.5 76.2 105.7 44.2 49.4 152.5 100.4 211.5 capacity of the connector. Rated voltage AC500V, DC700V Operation temperature range -40 +125 to Storage temperature range -10 to +60 TV approved products Shell size 10SL 18 22 24 Contact arrangement 3 10 22 10 Number of contacts 3 4 4 7 Rated current (A)/contact 7 10 13 17 23 17 23 23 35 46 23 35 46 23 35 2 Wire size (mm ) 0.5 0.75 1.25 2 3.5 2 3.5 3.5 5.5 8 3.5 5.5 8 3.5 5.5 Rated voltage (V) 200 500 250 500 250 250 Degree of pollution 3 2 3 2 3 2 Conducting voltage category Operation temperature range -40 to +125 Storage temperature range -10 to +60 Performance Items Speci cations Conditions 10SL, 20-29, 22-14: 5 m max. 1. Contact resistance 18-10, 20-15, 22-23: 3 m max. Measured at DC 1 A 22-22, 24-10: 1 m max. 2. Insulation resistance 5,000 M min. Measured at DC 500 V 3. Withstanding voltage No ashover or dielectric breakdown AC 2,250 V for one minute 10 to 500 Hz/cycle, full amplitude: 0.75 mm, with 2 98 m/s , 3 directions, 3 hours each 4. Vibration Resistance No electrical discontinuity for 10 s min. 10 to 500 Hz/cycle, full amplitude: 0.75 mm, with 2 98 m/s , 3 axis directions, 3 hours each 2 Acceleration: 490 m/s , duration: 11 ms, 5. Shock resistance No electrical discontinuity for 10 s min. 3 axis directions, 3 cycles each 6. Mating Cycles Contact resistance : Initial value x for 1.5 m max. 500 times -55: 30 minutes Normal temperature: 10 7. Temperature cycle Insulation resistance: a minimum of 500 M to 15 minutes 125: 30 minutes Normal temperature: 10 to 15 minutes, left for 5 cycles Insulation resistance: Temperature: 71, relative humidity: 95%, left for 8. Moisture resistance a minimum of 50 M (at high humidity min. 336 hours 500 M (when dry) min. Left in water at a depth of 1 m for 0.5 hours in the 9. Waterproof No water penetration into the connector. mated state. 1 2014.11w Ratings RatingsH/MS SeriesCircular Connectors Supporting TV and MIL spec. Materials Material Finish Remarks Aluminum alloy Black chromate Shell ---------------------- (Zinc alloy: H/MS3108B plug cord tube) treatment UL94V-0 Insulator PPS resin, PBT resin, or silicone rubber Black (Excluding silicone rubber) Contact Copper alloy Silver plating ---------------------- Acrylonitrile-butadiene rubber Bushing Black ---------------------- (Chloroprene rubber: H/MS08A plug) Ordering information Plug and receptacle H/MSA 3102 A 18 - 10 P X - D - T 01 Clamp H/MSA 3057 - 4A 01 qModel name: H/MS Series. wShape : Indicates the shape of the connector. 3102 : Receptacle 3106 : Straight plug 3108 : Right angle shaped plug 08: Low-pro le, right angle shaped plug 3057 : Cord clamp eStructure: Indicates the structure of the connector. A: Integrated shell B: Separated shell Shell size: This is the diameter of the screw (inches) at the termination end multiplied by the constant of 16. (Example: The r shell size of 18 is calculated by 1 1/8 x 16 = 18.) Contact arrangement: See pages 10 and 11 for details on contact arrangement. t Contact form: Indicates the termination style. y P : Soldered, male contact S : Soldered, female contact PC : Crimped, male contact SC : Crimped, female contact u Variations of insert position: The letters W, X, Y, or Z are used for any changes in the insert position from that of the standard type. i Ground contact number: Notes the grounded contact for TV approved products. The ground contact position corresponds to contacts C, D, or G, and varies depending on shell size. Part numbers without this symbol indicate that the part does not include a ground contact. oTV approved product: TV approved products that are compliant with DIN VDE 0627. Clamp size: Indicates both clamp size and structure. 0 1Other speci cations: A two-digit number such as (01) or (02) is added to indicate other speci cations. 2