Small, Waterproof, Push-On Bayonet Lock Connectors HR08D Series Push-On Bayonet Lock Mating is completed simply To unmate this connector, by pushing the plug onto the rotate the locking collar to receptacle. release the lock, then pull them apart. Features Fig.q 1. Simplified mating operations To mate the connector, simply push it onto the receptacle. To unmate, rotate the locking collar Cable exit directions and pull the plug back from the receptacle. (Fig. q) Simplified mating is enabled by the alignment markings Mating guide keys are provided at 3 points to prevent contact damage. They also provide the ability to blind mate these connectors when needed. Plug connector does not damage the receptacle contacts. 2. Waterproof structure Supports IP67 and IP68 ratings while in the mated condition. (Ratings explained below*) *IP67: Submerged in 1 m for 30 minutes Fig.w *IP68: Submerged in 2 m for 14 days 3. Adjustable cable direction The right angle plug can be adjusted to mount in any of the 8 different directions (adjustable in 45 increments). (Fig. w) 4. Variations available Items No. of Contacts 2 or 10 positions available Connector Type Straight Plug, Right Angle Plug, Receptacle (10 pos. only) Plug Termination Crimp, solder Receptacle Termination Solder Cord Tube Material Plastic, metal Cable Diameter Range 5.7 to 6.5 6.5 to 7.3 8.0 to 9.0 (Reference) In cases where the application will demand a high level of reliability, such as automotive, 1 2020.12 please contact a company representative for further information.HR08D SeriesSmall, Waterproof, Push-On Bayonet Lock Connectors Product Speci cations Rated Current 3A Operating Temperature Range -20 to +85 Ratings Rated Voltage AC200V, DC250V Storage Temperature Range -10 to +60 Items Speci cations Conditions 1. Contact Resistance 20m or below Measured with DC 1A 2.Insulation Resistance Minimum of 1,000M Measured with DC 500V 3. Withstanding Voltage No ashover or breakdown 10 pos. AC 900V for 1 minute 2 pos. AC 1,500V for 1 minute No electrical discontinuity of 10s or Tested in 3 directions with 10 to 500Hz /cycle, total 4. Vibration Resistance 2 greater vibration width of 0.75mm, and 98m/s , 3 hours each. 2 No electrical discontinuity of 10s or Tested in 3 directions with the acceleration of 490m/s , 5. Shock greater and a duration of 11ms, 3 times each 6. Durability Contact Resistance : Maximum of 30m 500 mating cycles Left at -55 : 30 minutes Ordinary temperature : 2 to 3 7. Temperature Cycles Insulation Resistance : Minimum of 500M minutes 85 : 30 minutes Ordinary temperature : 2 to 3 minutes, 2 to 3 minutes, Total of 5 cycles Insulation resistance Left at temperature 71 and humidity 95% for 336 hours. 8. Humidity Resistance Minimum of 50M (high humidity) Left at the temperature of 71 and 95% humidity for 336 Minimum of 500M (dry) hours. Should be no water leakage inside the Left submerged in water at the depth of 1m, for 0.5 hours, 9. Waterproof Structure connector in the mated condition. Materials / Finish Plug Component Materials Finish Remarks Outer Shell Zinc Alloy, aluminum alloy and polyamide resin (black) Nickel under plating ---------------------- Insulator PPS resin (black) ---------------------- UL94V-0 Female Contact Phosphorous bronze Gold plating ---------------------- O Ring, Gasket NBR, Nitrile hydride rubber ---------------------- ---------------------- Receptacle Component Materials Finish Remarks Outer Shell Zinc alloy Nickel under plating ---------------------- Insulator PPS resin (black) ---------------------- UL94V-0 Male Contact 10 position Brass Gold plating ---------------------- O Ring NBR ---------------------- ---------------------- Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug Receptacle HR08D 12 WP A - 10 S (**) HR08D 12 WR - 10 P (**) Model Name : HR08D series Model Name : HR08D series Shell Size : Diameter (mm) of the mating interface of the plug Shell Size : Diameter (mm) of the mating interface of the plug Shell Type Shell Type WR Receptacle WP : Straight plug, WLP: Right angle plug Number of Contacts : Contacts available (10 only) Cord Tube and Cable Range Type Contact Shape P : Male contact for solder termination A : Material of cord tube : Metal, with cable dia. range of ( 5.7 to 6.5) Other specifications : B : Material of cord tube : Metal, with cable dia. range of ( 6.5 to 7.3) A two-digit character is added to indicate other M : Material of cord tube : Plastic, with cable dia. range of (5.7 to 6.5) specifications as needed. N : Material of cord tube : Plastic, with cable dia. range of (6.5 to 7.3) K : Material of cord tube : Metal, with cable dia. range of (8.0 to 9.0) Number of Contacts : Contacts available (2 or 10) Crimp contact Contact Shape S : Female contact for solder termination HR34B - SC1 - 2 1 1 SC : Female contact for crimping termination Other specifications : A two-digit character is added to indicate other Model Name : HR34B series (Shares the same contacts specifications as needed. as the HR34B series) Contact Type SC1 : Female contact Contact Shape 1 : Single contact 2 : Reel contact Barrel Shape : 1 : 20 to 25 AWG Plating Type 1 : Gold plating 2