Small, Waterproof, Push-On Bayonet Lock Connectors HR08D Series Push-On Bayonet Lock Mating is completed simply To unmate this connector, by pushing the plug onto the rotate the locking collar to receptacle. release the lock, then pull them apart. Features Fig.q 1. Simplified mating operations To mate the connector, simply push it onto the receptacle. To unmate, rotate the locking collar Cable exit directions and pull the plug back from the receptacle. (Please refer to Fig. q) Simplified mating is enabled by the alignment markings Mating guide keys are provided at 3 points to prevent contact damage. They also provide the ability to blind mate these connectors when needed. Plug connector does not damage the receptacle contacts. 2. Waterproof structure Supports IP67 and IP68 ratings while in the mated condition. (Ratings explained below*) *IP67: Submerged in 1 m for 30 minutes Fig.w *IP68: Submerged in 2 m for 14 days 3. Adjustable cable direction The right angle plug can be adjusted to mount in any of the 8 different directions (adjustable in 45 increments). (Please refer to Fig. w) 4. Variations available Items No. of Contacts 2 or 10 positions available Connector Type Straight Plug, Right Angle Plug, Receptacle (10 pos. only) Plug Termination Crimp, solder Receptacle Termination Solder Cord Tube Material Plastic, metal Cable Diameter Range 5.7~6.5 6.5~7.3 8.0~9.0 (Reference) 1 2014.3 NEW Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.HR08D SeriesSmall, Waterproof, Push-On Bayonet Lock Connectors Product Speci cations Rated Current 3A Operating Temperature Range -20~+85 Ratings Rated Voltage AC200V, DC250V Storage Temperature Range -10~+60 Items Speci cations Conditions 1. Contact Resistance 20 m or below Measured with DC 1 A 2.Insulation Resistance Minimum of 1,000 M Measured with DC 500 V 3. Withstanding Voltage No ashover or breakdown 10 pos. AC 900 V for 1 minute 2 pos. AC 1,500 V for 1 minute No electrical discontinuity of 10 s or Tested in 3 directions with 10 to 500 Hz /cycle, total 4. Vibration Resistance 2 greater vibration width of 0.75 mm, and 98 m/s , 3 hours each. 2 No electrical discontinuity of 10 s or Tested in 3 directions with the acceleration of 490 m/s , 5. Shock greater and a duration of 11 ms, 3 times each 6. Durability Contact Resistance: Maximum of 30 m 500 mating cycles Left at -55: 30 minutes Ordinary temperature: 2~3 7. Temperature Cycles Insulation Resistance: Minimum of 500 M minutes 85:30 minutes Ordinary temperature: 2~3 minutes, 2~3 minutes, Total of 5 cycles Insulation resistance Left at temperature 71 and humidity 95% for 336 hours. 8. Humidity Resistance Minimum of 50 M (high humidity) Left at the temperature of 71 and 95% humidity for 336 Minimum of 500 M (dry) hours. Should be no water leakage inside the Left submerged in water at the depth of 1 m, for 0.5 hours, 9. Waterproof Structure connector in the mated condition. Materials Plug Component Materials Finish Remarks Outer Shell Zinc Alloy, aluminum alloy and polyamide resin (black) Nickel under plating ---------------------- Insulator PPS resin (black) ---------------------- UL94V-0 Female Contact Phosphorous bronze Gold plating ---------------------- O Ring, Gasket NBR, Nitrile hydride rubber ---------------------- ---------------------- Receptacle Component Materials Finish Remarks Outer Shell Zinc alloy Nickel under plating ---------------------- Insulator PPS resin (black) ---------------------- UL94V-0 Male Contact 10 position Brass Gold plating ---------------------- O Ring NBR ---------------------- ---------------------- Product Number Structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. Plug Receptacle HR08D 12 WP A - 10 S HR08D 12 WR - 10 P Model Name: HR08D series Model Name: HR08D series Shell Size: Diameter (mm) of the mating interface of the plug Shell Size: Diameter (mm) of the mating interface of the plug Shell Type Shell Type WR Receptacle WP: Straight plug, WLP: Right angle plug Number of Contacts: Contacts available (10 only) Cord Tube and Cable Range Type Contact Shape P: Male contact for solder termination A: Material of cord tube: Metal, with cable dia. range of ( 5.7 to 6.5) B: Material of cord tube: Metal, with cable dia. range of ( 6.5 to 7.3) M: Material of cord tube: Plastic, with cable dia. range of (5.7 to 6.5) Crimp contact N: Material of cord tube: Plastic, with cable dia. range of (6.5 to 7.3) K: Material of cord tube: Metal, with cable dia. range of (8.0 to 9.0) HR34B - SC1 - 2 1 1 Number of Contacts: Contacts available (2 or 10) Contact Shape S: Female contact for solder termination Model Name: HR34B series (Shares the same contacts SC: Female contact for crimping termination as the HR34B series) Contact Type SC1: Female contact Contact Shape 1: Single contact 2: Reel contact Barrel Shape: 1: 20-25 AWG Plating Type 1: Gold plating 2 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.