HT601/TM21P-88P Hirose

Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features 1. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B data wiring standard, meeting transmission performance of Enhanced Category 5. Protected latch tab Supports Gigabit Ethernet (1000BASE-T) and Fast Ethernet (100BASE-TX) high-speed LAN transmission. 2. EMI protection (TM21*P-88P) 360 coverage of the engagement area with a metal shield assures protection against electromagnetic interference. When mated with corresponding connector the shield surfaces are securely connected to provide continuous circuit. 3. Protected latch tab (TM21P-88P) Flexible case extends over the release tab preventing the possibility of breaking-off during handling of the complete cable assembly. 4. Termination of conductors 1 Self located 24 AWG conductors (solid or stranded) are terminated against pre-inserted contacts using simple tooling. 5. Simplified termination (TM21*P-88P) Removeable one piece cover allows easy access to 1 the termination areas. 2 6. Conforms to the ISO 8877 Standard (ISDN Interface Connector) 1 Cover Installation Procedure 197 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM21P SeriesModular Plug Connectors Compliant to Enhanced Category 5 Standards Pr oduct Specification Current rating 1A Rating Operating temperature range-25 to +60 (Note) Voltage rating 125 V AC Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 500 V AC / one minute (between adjacent contacts) 3. Withstanding voltage No flashover or insulation breakdown 1500 V AC / one minute (between contact and shield) 4. Contact resistance 230 m ohms max. 100mA DC Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, No electrical discontinuity of 5 ms or more 5. Vibration Contact resistance: 250m ohms max. 2 hours / 3 axis 2 6. Shock Acceleration of 490 m/s , 11 ms duration, No electrical discontinuity of 5 ms. min. Contact resistance: 250m ohms max. sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability Contact resistance: 250m ohms max. 200 (mating/un-mating) Temperature: -55/+5 to +35/+85/+5 to +35 8. Temperature cycle Contact resistance: 250 m ohms max. Duration: 30/5/30/5(Minutes) Insulation resistance: 100 M ohms min. 5 cycles 9. Humidity Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) 500 hours at temperature of 40 and humidity of 90% to 95% Insulation resistance: 10 M ohms min. (Dry state) 10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Note :Includes temperature rise caused by current flow. Materials Part Material Finish Remarks Insulator Polycarbonate Color: Clear UL94V-2 Contacts Copper alloy Contact area: Gold plating ------- Shield Copper alloy Tin plating ------- Conductor holding tray Polycarbonate Color: Clear UL94V-2 Cover Polyamide Color: Light beige (Note) UL94V-2 Note :Cover available in various colors. Refer to page 3. Ordering information Plugs- Shielded Plugs - Non-shielded TM21 C P - 8 8P TM22P - 8 8P 1 2 1 3 4 1 2 3 Series name TM21P: Shielded Series name TM22P : Non-shielded 1 1 Cover Type Size 8 : For 8 contacts 2 Blank: Protective latch cover 2 C: Short cover Inserted contacts 8P: 8 3 Size 8: For 8 contacts 3 Inserted contacts 8P: 8 4 198 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.