IEC Standard Compliant 1.85mm coaxial connectors 1.85mm Series Features 1. IEC Standard Compliant 1.85mm coaxial connector (IEC 61169-32) 2. Compatible with the frequency range of up to 67GHz 3. RoHS2 compliant Applications Optical transmission devices, Measuring for data transmission, Radio communication equipment, Measuring instruments etc. Product Speci cations Nominal characteristic Operating Temperature 50 -55 to +105 (95% RH or less) impedance Range Ratings Storage Temperature Rated frequency DC to 65GHz -55 to +50 (95% RH or less) Range Items Specifications Conditions Center : Less than 4m 1. Contact resistance Measured at less than 100mA External : Less than 4m 2. Insulation resistance 500M min. Measured at 250V DC 3. Withstanding voltage No flashover or breakdown 300V AC for 1 minute 4. Voltage standing V.S.W.R. : Less than 1.5 DC to 65GHz wave ratio Contact resistance at center : Less than 6m 5. Mating Cycles External : Less than 6m 500 cycles No broken, cracked, or loose parts No electrical discontinuity for more than Frequency : 10 to 2000Hz, half amplitude : 0.75mm, 2 6. Vibration resistance 1s. Acceleration : 196m/s , 12 cycles in each of 3 axis No broken, cracked, or loose parts directions 2 No electrical discontinuity for more than Acceleration : 980m/s , duration : 6ms, 7. Shock resistance 1s. Wave form : half-sine wave, 3 times in each of No broken, cracked, or loose parts 3 directions Insulation resistance : More than 100M 8. Moisture resistance of (in a high humidity environment) Left for 10 cycles (240 hours) in an environment with temperature/humidity Insulation resistance : More than 500M the temperature ranging from -10 to 65C and the cycle (in a dry environment) humidity ranging from 90 to 98%. No broken, cracked or loose parts Temperature : 5 cycles for a series of time periods : 9. Temperature cycle No broken, cracked or loose parts 55 for 30 minutes 3 minutes +105 for 30 minutes 3 minutes 10. Salt spray No considerable corrosion Continuous 48 hour cycle in 5% salt water solution *Measurement of voltage standing wave ratio (V.S.W.R.) The specified values of the voltage standing wave ratio (V.S.W.R.) noted above, are taken with the test set up shown in the figure below: HV-P-SF085 measurement system Network Analyzer D.U.T. details HV-P-SF085 with double ended harness D.U.T Termination Test Port Cable In cases where the application will demand a high level of reliability, such as automotive, 1 2019.4 please contact a company representative for further information.1.85mm Series IEC Standard Compliant 1.85mm coaxial connectors Materials / Finish Part Materials Finish Shell Stainless steel Passivated Insulator PPO / PTFE resin --------------- Contact Beryllium copper Gold plated Ring Stainless steel Gold plated Plug HV-P-SF085 8HEX 11.1 Please place cable assembly orders per the specifications below Cable assembly speci cations Please specify the dimensions of 1.85mm Series cable assembly as follows : Please contact HRS representative for cable length. Double ended assembly Single ended assembly L(mm) L(mm) Cable harness part numbering system Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. HV SF085N 1 L - P- -A - RS qw e r qSeries identifier : HV Harness type w None : On either end 2 : On both ends eCable type SF085N : 0.085-inch, semi-flexible cable rCable color : No jacket None 1 : Blue Overall length L (mm) : Length L is expressed by the unit of mm. 2