Waterproof Circular Connectors
JR-W Series
Features
1. Waterproof
The JR-W series is a rugged, waterproof
connector series that is IP67 and IP68 rated
in the mated condition.
IP67: Left in water at a depth of 1m for 30 minutes
IP68: Left in water at a depth of 2m for 14 days
2. Corrosion resistance
The outer shell is plated to improve corrosion
resistance, allowing this connector to be used
in various environments.
Product Speci cations
Shell size No. of contacts Current rating
3 10A
13
55A
7 10A
16
10 5A
Ratings Current rating
10 10A
21
16 5A
4 30A
25 16 10A
24 5A
Shell size No. of contacts Voltage rating
3
13 100V AC, 140V DC
5
7
16 100V AC, 140V DC
Ratings Voltage rating 10
10
21 100V AC, 140V DC
16
4 300V AC, 420V DC
25
16, 24 100V AC, 140V DC
Operating
temperature -25 to +85
range
Ratings
Storage
temperature -10 to +60
range
In cases where the application will demand a high level of reliability, such as automotive,
1
2018.8
please contact a company representative for further information.
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.JR-W Series Waterproof Circular Connectors
Item Speci cations Conditions
5m max.
1. Contact resistance Measured at DC 1A
JR16-10 contact crimping type : 10m max.
2. Insulation 1,000M min.
Measured at DC 500V
resistance JR25-4 contacts : 10,000M min.
3. Withstanding AC 1,000V for 1 minute
No ashover or dielectric breakdown.
voltage JR25-4 contacts : AC 3,000V for one minute
4. Vibration 10 to 55Hz/cycle, amplitude : 0.75mm,
No electrical discontinuity for 10s or greater.
resistance 3 axis derections, 2 hours each.
2
Acceleration : 490m/s , duration : 11ms
5. Shock resistance No electrical discontinuity for 10s or greater.
6 directions, 3 times each.
Contact resistance : 5m max.
6. Mating cycles 500 times
JR16-10 contact crimping type : 10m max.
-40 : 30 minute Normal temperature : 10 to 15
Insulation resistance : 1,000M min. minutes 100 : 30 minutes
7. Temperaure cycle
JR25-4 contacts : 10,000M min. Normal temperature : 10 to 15 minutes, left for 5
cycles
Insulation resistance:
10M min. (at high humidity)
8. Moisture 100M min. (when dry) Temperature : 40, relative humidity : 90 to 95%,
resistance JR25-4 contacts: leave 96 hours
100M min. (at high humidity)
1,000M min. (when dry)
Mated connectors left in water at a depth of 1.8m for
9. Waterproof No water penetraction into the connector.
48 hours.
Materials / Finish
Parts Material Finish Remarks
Outer shell Aluminium alloy, brass Black chromium plating
Insulator Phenol resin, PPS resin UL94V-0
Contact Copper alloy Silver plating
Waterproof packing Nitrile rubber, silicone rubber
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Plug and receptacle
JR 13 WP A 3P C (**)
-
qw er tyu o
Cord clamp
JR 13 WCC A - 4 (**)
qw e r i o
q Model name : JR Series
w Shell size Shell size is the outer shell diameter of the mating end of the plug.
e Shell type WP : Waterproof plug WR : Waterproof receptacle WCC : Waterproof clamp
Shell variation : Connectors are distinguished by A, B, or C if a shell variation is applied in the same form.
r
t Number of contacts.
y Contact form P : Male Contact
S : Female Contact
u Contact termination method None : Solder termination
C : Crimp termination
i Applicable cable diameter
o Other speci cations : A two-digit number is added to indicate other speci cations.
2
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.