The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Interface RF Connector with Switch, 3.9mm High, DC to 6GHz MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (DC 6GHz) used at high frequencies. To respond to the development of portable terminal technologies and popularization of high- frequency applications up to 6GHz this switch features low loss, low profile, and light weight. The switch circuit is designed so that the NC terminal is connected to the C terminal without a plug mated. Mating with a plug opens this connection. Vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. Features Saves board mounting space: 01. Low insertion loss Low profile: Height 3.9mm Light weight: Weight 0.11g Insertion loss is as low as: Typically, 0.08dB at 1GHz Typically, 0.1dB at 2GHz 02. Space saving External dimensions are 5.8mm x 5.4mm. Saves installation space. 03. Low profile Switch height is 3.9mm. MS-147(06) 04. Light weight Switch weight is 0.11g Plug 05. Long life The switch is guaranteed for up to 12,000 mechanical operations. 06. Auto insertable Available in embossey tape-and-reel auto-insertable format 07. Wide application range Operating frequency from DC to 6GHz. 08. RoHS compliant MS-147-C(LP)-1 All components and materials comply with the requirements of the EU Directive 2002/95/EC. 09. Self-alignment SMA conversion adapter The eccentricity for plug mating is 0.5mm. Application * Wireless communication (Bluetooth, IEEE 802.11) * Machines (Portable terminal, notebook PC, ETC, POS terminal, GPS terminal PDA, etc.) MS-147-HRMJ-1 * Also suitable for other high-frequency machines. 110 04/2009The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-147 Series Interface RF Connector with Switch, 3.9mm High, DC to 6GHz Product Specifications Not mated with the plug Mared (MS-147-HRMJ-1) Operating temperature range 30 ~ +85 10 ~ +65 Power rating 4 W 4 W Frequency range DC ~ 6 GHz DC ~ 6 GHz 0.2dB max. (DC ~ 2GHz) 0.15dB Max. (DC ~ 2GHz) 0.3dB max. (2GHz ~ 2.5GHz) Insertion loss 0.2dB Max. (2GHz ~ 3GHz) 0.4dB max. (2.5GHz ~ 3GHz) 0.4dB Max. (3GHz ~ 6GHz) 0.8dB max. (3GHz ~ 6GHz) 25dB min. (DC ~ 1GHz) Isolation 20dB min. (1GHz ~ 3GHz) 14dB min. (3GHz ~ 6GHz) 1.25 max. (DC ~ 2GHz) 1.2 Max. (DC ~ 3GHz) 1.3 max.(2GHz ~ 2.5GHz) V.S.W.R. 1.4 max.(2.5GHz~ 3GHz) 1.5 Max. (3GHz ~ 6GHz) 1.9 max.(3GHz ~ 6GHz) Item Standard Conditions Center 75m ohms max. 1.Contact resistance 100mA max. Outer 50m ohms max. 2.Insulation resistance 1,000M ohms or more 100V DC 3.Withstanding voltage No flashover or insulation breakdown 100V AC / one minute Frequency of 10 to 55 Hz, overall amplitude of 1.5 4. Vibration mm for 2 hours in each of 3 directions No electrical discontinuity for 10s Min. 2 Acceleration of 490 m/s , sine half-wave waveform, 5. Shock 3 cycles in each of the 3 axis 96 hours at temperature of 40 and humidity of 6.Humidity 90% to 95% Contact resistance: Center 100m ohms max. Outer 75m ohms max. Insulation resistance 10M ohms min. Temperature : 55 +15 to +35 85 +15 to +35 7.Temperature cycle Time:30 5 max. 30 5 max. 100 cycles Contact resistance: Center 100m ohms max. 8.Salt spray Outer 75m ohms max. Exposed to 5% salt water solution for 48 hours(at +35) No excessive corrosion 9.Durability Contact resistance: Center 100m ohms max. 12,000 cycles (Insertion/withdrawal) Outer 75m ohms max. Materials Part Material Finish Remarks Shell Phosphor bronze Gold plating Insulator Polyamide resin UL94HB Common terminal Berylium copper Gold plating ( ) Board circuit side N.C terminal Berylium copper Gold plating 04/2009111