The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Miniature Interface Coaxial Switch, DC to 10 GHz MS-162 Series Overview Designed to be used as the interface antenna connection for portable terminal devices as well as circuit testing on microwave boards (DC to 10GHz) the coaxial switch offers high performace, low loss, extremely high durability and reliability, in a small and lightweight package. Normally closed, the circuit is re-directed to the plug side by the mating of the plug with the receptacle. Features Comparison with the existing MS-147 1. Low insertion loss 0.08 dB typical at 1 GHz MS-147 MS-162 0.12 dB typical at 2 GHz Footprint 2 2 (not mated with the plug) 39.6mm 14.0mm 6.0 4.0 2. Space-saving design 5.4 3.5 3.5 mm x 3.1 mm occupied board space. 3. Low profile 2.5 mm max. protrusion above the board. 4. Lightweight 0.044 g total weight 5. Durability 65% saving of space 12, 000 mating/unmating cycles, with corresponding plug. 6. Critical area protection Height MS-162 (Receptacle) contact has nickel plating areas to prevent solder wicking into critical areas. 7. Board placement with automatic equipment. Packaged on tape-and-reel. 36% lower profile 8. Self alignment Weight When mating, plug and receptacle will self align in 0.11g 0.044g horizontal axis within 0.5mm. 9. RoHS compliant 60% lighter weight All components and materials comply with the requirements of the EU Directive 2002/95/EC. Plugs SMA conversion adapter Applications *Wireless communication modules (Bluetooth, WLAN, UWB, ZigBee) *Portable terminals, notebook computers, ETC, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance and MS-162-C(LP)-1 MS-162-HRMJ-1 re-direction of the transmission. 2006.2 1 3.9 6.6 5.8 3.1 MAX 2.5 3.5The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Not mated with the plug Open (Mated with MS-162-HRMJ-1) Operating temperature range 40 to +85 Rated power 4W Frequency range DC to 10GHz 1.2 max. (DC to 3GHz) 1.2 max. (DC to 3GHz) V.S.W.R. 1.5 max. (3GHz to 6GHz) 1.6 max. (3GHz to 6GHz) 1.7 max. (6GHz to 10GHz) 1.7 max. (6GHz to 10GHz) 0.15 dBmax. (DC to 2GHz) 0.2 dBmax. (DC to 2GHz) 0.20 dBmax. (2GHz to 3GHz) 0.3 dBmax. (2GHz to 3GHz) Insertion loss 0.40 dBmax. (3GHz to 6GHz) 0.5 dBmax. (3GHz to 6GHz) 0.70 dBmax. (6GHz to 10GHz) 0.7 dBmax. (6GHz to 10GHz) 25 dBmin. (DC to 1GHz) 20 dBmin. (1GHz to 3GHz) Isolation loss 14 dBmin. (3GHz to 6GHz) 12 dBmin. (6GHz to 10GHz) Item Specification Conditions 1. Contact resistance 100 mA 100 m max. 2. Insulation resistance 1000 M min. 100 V DC 3. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 1.5 mm, No electrical discontinuity of 10 s or more 2 hours in each of the 3 axis. 2 Acceleration of 490 m/s , 6 ms duration, 5. Shock No electrical discontinuity of 10 s or more sine half-wave waveform, 3 cycles in each of the 3 axis. Contact resistance: 100 m max. 6. Humidity 96 hours at 40, RH of 90% to 95% Insulation resistance: 10 M min. Temperature: 55/ +5 to +35/ +85/ +5 to +35 Contact resistance: 100 m max. 7. Thermal shock Time: 30 / + 5 max. / +30 / +5max. (Minutes) Insulation resistance: 10 M min. 100 cycles 8. Durability (mating/un-mating, with Contact resistance: 100 m max. 12, 000 cycles corresponding plug) Materials Part Material Finish Remarks Shell Brass Gold plated Insulators Polyamide UL94V-0 Common terminal Beryllium copper Partially gold plated (Nickel barrier) Antenna terminal Phosphor bronze Partially gold plated (Nickel barrier) 2
