The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. PCN Series Product Compliant to DIN41612/IEC603-2 Standard PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type) Double-sided two point Contact System PCN Series Features Single-sided two point Contact System 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard. 2. Variation in number of contacts 10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and 144 contacts are available. 3. Two point contact construction PCN10 and 12 series are constructed with high reliable double- sided two point contacts. PCN13 series pursues after cost performance, and constructed with single sided two point contacts. 4. Broad applications DIN standard types of B, C, R, and Q are available. The flux tight product is available. The easy lock pin type to prefix the board is available. 5. Stacking height variation Stacking Connector PCN10H series contains 25, 30, 35, 40 and 45mm stacking height. 6. Circuit protection function available PCN10MC series utilizes a sequence structure for circuit protection function. 7. Cable connector ID connector for ribbon cable is available. The connector is prepared for crimping connection for AWC 26 to 30 cables. Application Control equipment, exchange, measuring instruments etc. A14The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. PCN Series Product Compliant to DIN41612/IEC603-2 Standard Product Specifications + Storage Temperature Range: -10 to 60 (Note 2) + Current rating: 2A Operating Temperature Range: -55 to 85 (Note 1) Rating Voltage rating: 300V AC Operating Humidity Range: 85% max Storage Humidity Range: 40 to 70% (Note 2) Item Specification Condition 6 1.Insulation Resistance 10 M ohms 100V DC 2.Withstanding Voltage 1000V AC (insulation displacement, crimping type: 650V AC) /1 minute. No flashover or insulation breakdown. 3.Contact Resistance 20m ohms max. 0.1A 4.Vibration No electrical discontinuity of 10s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6 5.Humidity(Steady state) Insulation resistance : 10 M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% (-65 : 30 minutes 15 to 35: 5 minutes max. 6.Temperature Cycle No damage, cracks, or parts looseness. 125 : 30 minutes 15 to 35: 5 minutes max.) 5 cycles 7.Durability (Mating/un-mating) 500 cycles Contact resistance : 20m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300 for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Parts Material Finish Remarks Insulator PBT Gray UL94V-0 Pin header Brass Contact area: Gold plated --------------- Contact Receptacle Copper alloy Remainer: Tin plated --------------- Ordering Information PCN 10 Series PCN10 A * P 2.54 DS 1 2 3 4 5 6 1 Series Name : PCN10 3 Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, 100 2 Blank 3-row : 48, 96, 144 A mold type (as listed below) 4-row : 128 B 4 Connector type : P : Pin header C : Flux prevention type (DSA only) : S : Receptacle D : Rack installation type 5 Contact pitch : 2.54mm EA : With Board prefixed lock pin 6 Contact type H : Stacking height 35mm type DS : Right angle through hole type HA : Stacking height 30mm type DSA : Straight through hole type HB : Stacking height 25mm type WA : Wrapping type (0.5tx0.7W) HC : Stacking height 45mm type WB : Wrapping type (0.5tx0.5W) HD : Stacking height 40mm type R : Insulation displacement type MC : Circuit Protection function type C : Crimping type * * A15