Plastic Push-Pull Lock Connectors
RP13 Series
Features
1. Superior mating operability
A secure mating condition is achieved by simply pushing the plug on to the
receptacle; Pull back on the locking sleeve to easily un-mate the connector.
Index marks are provided on the plug for easy mating alignment.
Our proprietary guide keys aid with making a correct mating
orientation in blind or low light conditions.
2. Light weight and robust design
The strong outer shell is made of glass-reinforced polycarbonate
resin, producing light but durable connectors.
3. Available in an anti-static version
The anti-static version connects the plug and receptacle housing
together in such a way that the surrounding shield guards against
the effects of static electricity.
4. Variation
Items
Number of contacts 13, 15, 20
Connector type Plug and jack: Straight, Receptacle: Straight, right angle
Plug termination type Crimp
Receptacle termination type Crimp, PCB dip
Receptacle mounting style Flange, jam nut
Product Speci cations
Rated Standard type : 2A (when using a wire of at least 24 AWG) Operating
10 to +60
current Anti-static type : 2A (when using a wire of at least 22 AWG) temperature range
Ratings
Rated For 13 and 15 contact positions : AC 30V, DC 42V Storage
10 to +60
voltage 20 contacts : AC 100V, DC 140V temperature range
Items Speci cations Conditions
1. Contact For 13 and 15 contact positions : 15m max.
Measured at DC 1A
resistance 20 contacts : 30m max.
2. Insulation
1,000M min. Measured at DC 250V
resistance
3. Withstanding
No ashover or dielectric breakdown. AC 300V for 1 minute
voltage
4. Vibration 10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis
No electrical discontinuity for 10s or greater.
resistance directions, 2 hours each
2
5. Shock Acceleration : 490m/s , duration : 11ms,
No electrical discontinuity for 10s or greater.
resistance 3 axis directions, 3 cycles each
Contact resistance :
6. Mating cycles For 13 and 15 contact positions : 20m max. 1,000 times
For 20 contact positions : 45m max.
-55 : 30 minutes Normal temperature : 10 to
7. Temperature
Insulation resistance : 100M min. 15 minutes 85 : 30 minutes Normal
cycle
temperature : 10 to 15 minutes, leave total 5 cycles
8. Moisture Insulation resistance : 10M min. (at high humidity) Temperature : 40, relative humidity : 90 to 95%,
resistance 100M min. (when dry) leave 96 hours
Materials / Finish
Items Material Finish Remarks
Exterior, insulator Polycarbonate resin -------------- UL94V-0
Plug Clamp Brass -------------- --------------
Bushing Vinyl chloride resin -------------- --------------
Polycarbonate resin -------------- UL94V-0
Exterior, insulator
Steel Nickel plating
Receptacle
Female contact Phosphor bronze --------------
Silver plating
Male contact Brass
Crimp contact Female contact --------------
Phosphor bronze Silver plating, gold plating
Crimp contact Male contact --------------
In cases where the application will demand a high level of reliability, such as automotive,
1
2018.7w
please contact a company representative for further information.
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.RP13 SeriesPlastic Push-Pull Lock Connectors
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Plug
RP13A - 12 P A - 13 S C (01)
qModel name : RP13A Series
yContact form
S : Female contact
Shell size : Th e shell size is the outer diameter of the mating
w
P : Male contact
end of the plug.
eShell type uContact termination type:
P : Straight plug A : Straight, PCB dip
R : Receptacle B : Right-angle, PCB dip
J : Jack C : Contact termination by crimping
rShell variation : Connectors are distinguished by A, B, or C
iOther speci cations : A two-digit character is added to
if a variation is made within the series.
indicate other speci cations as needed.
tNumber of contacts
Crimp contact
RP13A - SC - 2 1 1
!1Barrel form :
Model name : Indicates the series name.
q
RP13, RP13A 1 : For 18 to 22 AWG
RP13, RP13A, RP19
2 : For 24 to 28 AWG
o Contact type :
RP19 1 : For 18 to 22 AWG
SC : Socket type crimp contact (female)
2 : For 24 to 30 AWG
PC : Pin type crimp contact (male)
!2 Identi cation of plating :
Contact form :
!0
1 : Gold plating
1 : Loose piece contacts
2 : Silver plating
2 : Reel contacts
2
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.