Interface Connector for Industrial Ethernet Applications TJ*L Series Overview The TJL Series is designed as an ideal choice for widely used Industrial Ethernet applications. It supports the on-site information wiring system, JIS X 5150 (ISO/IEC 11801) Class D (Category 5). Variations are available in a Board mount and relay types. Available in 1 port (4 pos) and 2 ports (8 pos) type. Conventional Screw Locking industrial connector This type requires torque management (M12 etc.) and screw fastening space. Snap-in lock type provides easy mating and demating / mounting and demounting Hirose TJ*L More efficient operation is realized Series during installation and maintenance (How abound : No torque mangement required) Uniform cable strip length enables stable Features transmission performance 1. Supports Ethernet Uniform cable strip length Supports on-site information wiring system, JIS X Line arrangement for 5150 (ISO/IEC 11801) Class D (Category 5), and contact can be used for connecting Ethernet. Additionally, it ensures sufficient creepage distance and withstand Line arrangement voltage of AC1500V between contacts and shield. plate 2. Withstands vibration and impact Incorporated in the The connector is highly resistant to shock and insulation case vibration, and has passed shock and vibration tests for railway vehicles (JIS E 4031 Group 1 Grade B). Insulation case 3. Snap-in lock feature Snap-in lock design provides easy locking just by Completed contact unit inserting the connector. Provides a clear tactile click when fully mated. (Refer to page 3 for details.). 2-piece structure incorporates the 4. Uniform cable strip length to produce contact in the insulation case after arranging stable transmission performance the wire with a wire arrangement plate Unique2-piece structur equalizes cable strip Note: Please refer to our technical directive (ATAD-E3078) for wiring details. length and contributes to stabilizing transmission Fig.1 performance by reducing variations in workmanship. (Fig.1) Incorrect insertion prevention key 5. Supports the panel size of 3U4HP Can be mounted on a 3U4HP panel of a VME rack Plug Receptacle or a Compact PCI rack. Pattern 1 *One 1-port and one 2-port type can be mounted on one panel (3 ports resp. 12 positions) 6. Incorrect insertion prevention key By providing an incorrect insertion prevention keying, incorrect insertion of plugs can be prevented when multiple plugs are used side Pattern 2 by side. There are 3 different combinations of the incorrect insertion prevention key available. (Fig.2) 7. Cutting terminal The cutting terminal is widely used in railway Pattern 3 markets etc. 8. Available for wire connecting work in the field The wire crimping type with commercially available hand tools (MIL-compliant products) is suited for field wire connecting work. Prevents incorrect insertion in the adjacent connector by a 3 pattern keying Fig.2 In cases where the application will demand a high level of reliability, such as automotive, 1 2016.9 please contact a company representative for further information. Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.TJ*L SeriesInterface Connector for Industrial Ethernet Applications 9. Selectable cable size Selectable cable size 2 different cable sires are supported. 2 Cable size Applicable contact Remarks 0.3mm (22AWG) 2 0.75mm (18AWG) TJ50L-22PCA Male contact for a trunk jack (22AWG) (Fig.3) 2 0.3mm TJ50L-22SCA Female contact for plug 10. Can be temporarily held on the board TJ50L-18PCA Male contact for a trunk jack (18AWG) 2 Right angle type receptacle can be held on the 0.75mm TJ50L-18SCA Female contact for plug board before mounting. To fix the receptacle you Recommended cables can choose either screws or rivets. (1) Manufactured by Harting, outer diameter of cable 6.60.2 (Fig.4) Ha-VIS EtherRail Cable, 4x AWG 22/7, Cat. 5/5e 11. Board thickness (2) Manufactured by Hitachi Metals Ltd, Outer diameter of the cable 8.50.3 The receptacle supports a board thickness of CQEV-SAB(CAT5E) 0.75SQ4C 1.6mm to 2.4mm. (3) Manufactured by Harting, outer diameter of cable 8.20.2 Ha-VIS EtherRail Cable, 4x AWG 18/7, Cat. 5e 12. Robust structure (4) Manufactured by Harting, outer diameter of cable (max.) 8.8 (minimum diameter N/A) By integrating the panel in between the receptacle Ha-VIS EtherRailR Cable, 4x 0.75sq, Cat. 5/5e body and the hood (supplied item/attached item), Note : Recommended cables are just examples. the robustness of the installed connector rises. If intending to use a different cable, please contact us. (Fig.5) Fig.3 It can be temporarily fixed on the board. Secure with screws Secure with rivets The connector can be temporarily fixed on the board before actually mounting it. This method can be used with either screw or rivet. Fig.4 Robust structure Before After installation installation Connector body Integration Hood (supplied item/ attached item) Panel The assembly design holds the panel between the connector body and the hood. After the installation the panel is in between the connector body / receptacle body and the hood (supplied item/attached item). Fig.5 2 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.