Subminiature, LAN Modular Jack Connectors TM11R-5M2 Series Features 24 1. Fast Ethernet Support 16 21 Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for 1,2-3,6 conductor pairs. As such, these products fully support Fast Other series Ethernet (100BASE-TX) transmission. TM21R--5C--88--LP 2. Subminiature Design Contributes to 17.5 Saving Space in the Equipment 15 14.5 Having built-in optical indicators, with height of only 11.5mm, width of 15mm and depth of 17.5mm the connectors can be used in extremely limited spaces. TM11R--5M2--88--LP 3. Built-in Optical Indicators Optical indicators are integral part of the Space saving connectors help saving space on customers board. Compared with LED type indicators, they do not emit any electrical noise. housing LED optical indicators are taking place 4. EMI protection Metal shield covers the outer surfaces of the connectors assuring complete protection against electromagnetic interference. Built-in multiple shield and ground contacts assure reliable connection with the mounting panel as well as with the mating connectors. EMI protection 5. Environmental considerations Plating is lead-free in order to protect environment. 6. FCC Standards Meets requirements of FCC Title 47, Part 68, Subpart F. Built-in LED type Built-in Optical pipe type Applications (Possibility of electromagnetic (No electromagnetic noise emission and interference.) noise emission.) Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment, Medical Diagnostic Equipment. 2018.8 1 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 11.5 13.4TM11R-5M2 SeriesSubminiature, LAN Modular Jack Connectors Product Specifications Current rating 1A Rating Operating temperature range : -25 to +80 (Note) Voltage rating 125V AC Item Specification Conditions 1. Insulation resistance 100M min. 100V DC 2. Dielectric Withstanding Voltage No flashover or insulation breakdown 500V AC applied for 1minute (between adjacent contacts) 3. Withstanding voltage No flashover or insulation breakdown 1500V AC / 1minute (between contact and shield 4. Contact resistance 230m max. 100mA Frequency : 10 to 55Hz, single amplitude of 0.75mm, No electrical discontinuity of 5 sec. or more. 5. Vibration Contact resistance : 250m max. 2 hours / 3 axis 2 Acceleration of 490 m/s , 11ms duration, No electrical discontinuity of 5 sec. or more. 6. Shock Contact resistance : 250m max. sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability Contact resistance : 250m max. 200 cycles (mating/un-mating) Temperature : -55/+15 to +35/+85/+15 to +35 Contact resistance : 250m max. Duration : 30/2 to 3/30/2 to 3 (Minutes) 8. Temperature cycle Insulation resistance : 100M min. 5 cycles Contact resistance : 250m max. 500 hours at temperature of 40 and humidity Insulation resistance : 1M min. (High humidity) 9. Humidity of 90% to 95% Insulation resistance : 10M min. (Dry state) 10. Salt Spray Contact resistance : 250m max. Exposed to density 5% salt water for 48 hours Note : Includes temperature rise caused by current flow. Materials / Finish Part Material Finish Remarks Insulator PBT Color : Black UL94V-0 Contact area : Gold plating Contact Copper alloy ------- Termination area : Tin alloy plating Optical pipe Polycarbonate Color : Transparent UL94V-0 Shield Copper alloy Tin plating ------- Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Jacks TM11 R - 5M2 - 8 8 - LP 1 2 3 4 5 6 1 Series name TM11 Series 2 Connector type R : Jack 3 Jack type 5M2 : PCB Right-angle through hole type 4 Jack opening code 8 : 8 contacts 5 Number of inserted contacts 8 : 8 contact 6 Optical pipe LP : With optical pipe inserted Blank : Without optical pipe 2 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.