Subminiature, LAN Modular Jack Connectors TM11R-5M2 Series Features 24 1.Fast Ethernet Support 16 21 Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for 1,2-3,6 conductor pairs. As such, these products fully support Fast Ethernet (100BASE-TX) transmission. Other series 2. Subminiature Design Contributes to Saving TM21R--5C--88--LP Space in the Equipment 17.5 Having built-in optical indicators, with height of only 15 14.5 11.5mm, width of 15mm and depth of 17.5mm the connectors can be used in extremely limited spaces. 3. Built-in Optical Indicators Optical indicators are integral part of the connectors help TM11R--5M2--88--LP saving space on customers board. Compared with LED type indicators, they do not emit any Space saving electrical noise. 4. EMI protection Metal shield covers the outer surfaces of the connectors housing LED optical indicators are taking place assuring complete protection against electromagnetic interference. Built-in multiple shield and ground contacts assure reliable connection with the mounting panel as well as with the mating connectors. 5. Environmental considerations Plating is lead-free in order to protect environment. 6. FCC Standards EMI protection Meets requirements of FCC Title 47, Part 68, Subpart F. Applications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment, Medical Diagnostic Built-in LED type Built-in Optical pipe type Equipment. (Possibility of electromagnetic (No electromagnetic noise emission and interference.) noise emission.) 2012.6 1 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 11.5 13.4TM11R-5M2 Series Subminiature, LAN Modular Jack Connectors Product Specifications Current rating 1A Rating Operating temperature range : -25 to +80 (Note) Voltage rating 125 V AC Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Dielectric Withstanding Voltage No flashover or insulation breakdown 500 V AC applied for one minute (between adjacent contacts) 3. Withstanding voltage No flashover or insulation breakdown 1500 V AC / one minute (between contact and shield) 4. Contact resistance 230 m ohms max. 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, No electrical discontinuity of 5 sec. or more. 5. Vibration Contact resistance: 250m ohms max. 2 hours / 3 axis 2 Acceleration of 490 m/s , 11 ms duration, No electrical discontinuity of 5 sec. or more. 6. Shock Contact resistance: 250m ohms max. sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability Contact resistance: 250m ohms max. 200 cycles (mating/un-mating) Temperature: -55/+15 to +35/+85/+15 to +35 Contact resistance: 250 m ohms max. Duration: 30/2 to 3/30/2 to 3(Minutes) 8. Temperature cycle Insulation resistance: 100 M ohms min. 5 cycles Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) 9. Humidity 500 hours at temperature of 40 and humidity of 90% to 95% Insulation resistance: 10 M ohms min. (Dry state) 10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Note :Includes temperature rise caused by current flow. Materials Part Material Finish Remarks Insulator PBT Color: Black UL94V-0 Contact area: Gold plating Contact Copper alloy ------- Termination area: Tin alloy plating Optical pipe Polycarbonate Color: Transparent UL94V-0 Shield Copper alloy Tin plating ------- Ordering information Jacks TM11 R - 5M2 - 8 8 - LP 1 2 3 4 5 6 1 Series name TM11 Series 2 Connector type R: Jack 3 Jack type 5M2: PCB Right-angle through hole type 4 Jack opening code 8: 8 contacts 5 Number of inserted contacts 8: 8 contact 6 Optical pipe LP: With optical pipe inserted Blank: Without optical pipe 2 May.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.