Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height W.FL2 Series Occupied Mounting Area 2.0mm 2.0mm W. FL2 Series W. FL Series Features Mated height comparison (with W.FL Series) 1. Nominal mated height of 1.18mm (Max. 1.3mm) W. FL2 Series W. FL Series 2. Small board footprint As with X.FL, W.FL Series, the receptacles W.FL2-LP-032HF(06) 2 occupies an area of 3.4mm and share the same W.FL-LP-040HF(06) W.FL2-LP-040HF(06) land pattern. Note : The W. FL2 Series is not compatible with X.FL, W.FL Series. 3. Extremely light weight The world s smallest and lightest class of coaxial connectors. W.FL2-R-SMT-1 W.FL-R-SMT-1 Receptacle : 5.0mg Right angle plug : 17.4mg(040), 15.3mg(032) 4. Frequency range up to 6 GHz Fig.1 DC to 3GHz : V.S.W.R. of 1.3 max. 3GHz to 6GHz : V.S.W.R. of 1.4 max.(0.5, 0.81dia.) 3GHz to 6GHz : V.S.W.R. of 1.5 max.(0.64dia) W. FL2 Plug and Receptacle 5. Automatic board placement Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic L A Eaj placement equipment. ( ( 8VWaZ 6. Plugs are terminated with ultra-fine coaxial R (fluorinated resin insulated) cable & &- The use of ultra-fine coaxial(fluorinated resin B6M& ( P insulated)cables on these connectors offer the 9 V % -& % +) % * ability to complete connections in small, confined spaces with a smooth, easy operation. L AHB& 7. Simple connector mating / un-mating GZXZeiVXaZ Use of the available mating / un-mating tools assures correct connection / disconnection of the plug and receptacle. Fig.2 8. Halogen-free*(Receptacle, Plug) *As defined by IEC61249-2-21 Br-900 ppm maximum, Cl-900 ppm maximum, Cl+Br combined-1,500 ppm maximum. In cases where the application will demand a high level of reliability, such as automotive, 1 2018.6 please contact a company representative for further information. 1.18 MAX1.3 1.4 MAX1.55W.FL2 SeriesUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height Product Specifications -40C to +90C Nominal characteristic impedance 50 Operating temperature range (90%RH max.) Rating -30C to +70C Frequency range DC to 6GHz Storage temperature range (90%RH max.)Note 1 Item Specification 1. Contact resistance 20m max. (center contact), 10m max. (outer contact) 2. Insulation resistance 500M min., 100V DC 3. Withstanding voltage 200V AC / 1 minute 1.3 max. (DC to 3GHz) 4. V.S.W.R. 1.4 max. (3GHz to 6GHz) 0.5, 0.81dia. 1.5 max. (3GHz to 6GHz) 0.64dia. * V.S.W.R. Measurement Note1 : Cable assembly measurements with SMA conversion as shown on the block diagram below. Note: Verify connection and measurement setup. adapters mated with W.FL2 plug at each end of the 100cm long ultra-fine coaxial cable. Network Analyzer Note2 : Receptacles mounted on a 50 ohms glass epoxy board. Test Set Measurements were conducted with SMA conversion Test Port adapters attached. D.U.T Termination Test Post Cable Note1. The term storage refers to products stored for long period of time prior to mounting and use. MaterialsMaterials / Finish Plugs Right Angle Part Material Finish Shell Phosphor bronze Silver plated Insulator LCP Color : Milky white, UL94V-0 Female center contact Phosphor bronze Gold plated Receptacle Part Material Finish Shell Phosphor bronze Silver plated Insulator LCP Color : Black, UL94V-0 Male center contact Brass Gold plated 2