Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1.2 mm Mated Height X.FL Series Connector mated condition X.FL-LP-040 X.FL-LP-032 09 X.FL-LP P -068 X.FL-PR-SMT1-2 X.FL-R-SMT-1 X.FL-R-SMT-1 X.FL-R-SMT-1 Features 4. High frequency transmission 1. A Low mated height of 0.94 or 1.2 This series offers the high performance needed to mm (maximum of 1.0 or 1.3 mm) meet the requirements of many different When connected this series delivers a world class miniature devices, featuring a DC to 6 GHz low mated height of 1.0 or 1.3 mm (see Figure 1). capacity. X.FL-LP(P)-068 supports up to 12 GHz. 2. Minimal mounting area required 5. Automatic board placement 2 The receptacle requires a footprint of only 3.4 mm , This product is available in embossed which is the same footprint as our W.FL and W. packaging this allows the plug and receptacles FL2 series. In addition, the same land patterns can to be automatically mounted. be used. (Note: The X.FL series has no mating compatibility with the W.FL2 and W.FL series.) 6. The use of ultra-fine coaxial (fluorinated resin insulated) cables 3. Ultra lightweight The use of ultra-fine coaxial (fluorinated resin The worlds smallest and lightest class of coaxial insulated) cables on these connectors offer the connectors ability to complete connections in small, Receptacle: 3.2 mg confined spaces with a smooth, easy operation. Right angle plug: 22.0 mg (068),14.4 mg (040), and 15.7 mg (032) Plug receptacle: 5.5 mg 7. Simple connector mating / unmating Dedicated tools are available to ensure that proper mating/unmating of this connector takes place. Product Speci cations Nominal characteristic impedance 50 Operating temperature range -40C to +90C (RH 90% or less) Ratings Frequency range DC~6GHz Storage humidity range -30C to +70C (RH 90% or less) Speci cations (for each plug type) Item X.FL-LP-040 X.FL-LP-032(09) X.FL-LP(P)-068 X.FL-PR-SMT1-2 1. Contact (Center) Maximum of 20 m (Center) Maximum of 25 m (Center) Maximum of 25 m (Center) Maximum of 25 m resistance (Outer) Maximum of 10 m (Outer) Maximum of 25 m (Outer) Maximum of 10 m (Outer) Maximum of 15 m 1.3 or less (DC to 3 GHz) 1.3 or less (DC to 3 GHz) 1.3 or less (DC to 3 GHz) 1.3 or less (DC to 3 GHz) 2. V.S.W.R. (*) 1.4 or less (3 to 6 GHz) 1.4 or less (3 to 6 GHz) 1.4 or less (3 to 6 GHz) 1.5 or less (3 to 6 GHz) 1.7 or less (6 to 12 GHz) 3. Insulation resistance Minimum of 500 M , 100 V DC 4. Withstanding voltage 200 V AC, 1 minute *V.S.W.R. Measurement System (plug type) The above V.S.W.R. speci cation values were measured using the measurement system shown below. Note 1: Cable type connectors were measured with SMA Network Analyzer conversion adapters attached to both ends of the Test Set Test Port harness product of a suitable 100 cm cable. Note 2: Board type connectors were mounted to a 50 glass epoxy board and measurements were D.U.T Termination Test Port Cable conducted with SMA conversion adapters attached. In cases where the application will demand a high level of reliability, such as automotive, 1 2014.1 please contact a company representative for further information. NEW Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 0.94 1.0MAX 1.2 1.3MAX 0.89 0.95MAXX.FL SeriesLow-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1.2 mm Mated Height Cable Assembly (Plug) X.FL-LP-040 (Applicable cable: outer diameter 0.81 or 0.64) 3.3 0.81 or 0.64 Part Material Finish and remarks Shell Phosphor bronze Gold plated Insulator LCP resin Black, UL94V-0 Female contact Phosphor bronze Gold plated X.FL-LP-032 (09) (Applicable cable: outer diameter0.5) 3.5 0.5 Part Material Finish and remarks Shell Phosphor bronze Partially gold plated Insulator LCP resin Black, UL94V-0 Female contact Phosphor bronze Gold plated X.FL-LP (P) -068 (Applicable cable: outer diameter1.13) 3.6 1.13 Part Material Finish and remarks Shell Phosphor bronze Partially gold plated Insulator LCP resin Black, UL94V-0 Female contact Phosphor bronze Gold plated Cable Guide Cable Specification Cable Description Dielectric Jacket Nominal Nominal attenuation Type Center Conductor Outer Conductor Diameter Diameter Impedance 3GHz 6GHz 0.81 mm Coaxial 7/0.05 (36 AWG) 0.40 0.81 Single-layer braided wire 04 50 5.6dB/m 8.3dB/m Tin plated Cable Silver plated annealed copper wire FEP FEP Fiber or paper covered 0.64 mm Coaxial 7/0.05 (36 AWG) 0.44 0.64 044 copper winding wire 50 5.85dB/m 8.59dB/m Cable Silver plated annealed copper wire PFA PFA Tin plated Fiber or paper covered 0.5 mm Coaxial 7/0.04 (38 AWG) 0.32 0.5 032 copper winding wire 50 6.13dB/m 9.09dB/m Cable Silver plated copper alloy wire PFA PFA Tin plated 1.13 mm Coaxial 7/0.08 (32 AWG) 0.68 Single-layer braided wire 1.13 068 50 3.7dB/m 5.3dB/m Cable Silver plated annealed copper wire FEP Tin plated FEP 2 Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 2 2 1 0.74 0.74 2