Micro-USB connectors meeting USB 2.0 Standard
ZX Series
Note : Contact us to ascertain whether a TID number has
been acquired for an individual product.
Fig.1
Overview
Reverse
Extremely small highly reliable connectors complying with
Drop-in ( )
Top mount
physical, electrical and environmental requirements of
(Mid-mount)
Micro-USB standard (USB 2.0).
Receptacles and plugs are available in a wide variety of
mounting and termination styles, allowing their use in
Standard
various applications.
( )
Bottom mount
Features
1. Size reduction
Compared with the standard Mini-USB connectors, the
size of ZX connectors is reduced by approximately 60%
while still allowing a high-speed data transfer of 480 Mbps,
specified in USB 2.0.
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in
standard, mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations.
Fig.2
3. Plug styles
Corresponding to the receptacle styles, two interface
USB 2.0 Hi-Speed (480 Mbps)
configurations: Micro-A and Micro-B, with direct wire or
PCB wire soldering. Eye diagram measurement results :
Several plug styles can be used for data transmission,
Measured with 2.4 m long USB 2.0 cable
earphone or charging applications.
4. Smooth mating and unmating
A smooth mating and unmating operation results in less
wear and a longer product life. The unique Hirose active
TP2
latch mechanism produces a reliable and durable
connector.
Even after repeated use, the user will experience a
smooth click sensation when mating the connectors.
Note : The statement above only applies when using both
500ps/div
plug and receptacles made by Hirose Electric.
Fig.3
5. Hirose was the first company to obtain a
Micro-USB certification (TID number).
In cases where the application will demand a high level of reliability, such as automotive,
1
2017.12
please contact a company representative for further information.
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
200 mV/divZX SeriesMicro-USB connectors meeting requirements of USB 2.0 Standard
Product Specifications
Voltage rating 30V AC
1A (per contact) or
Ratings Current rating 1.8A (contacts No. 1 and 5) and Operating temperature range -30C to +85C (Note1)
0.5A (contacts No. 2, 3, and 4)
Storage temperature range -30C to +60C
Item Specification Conditions
1. Contact resistance 30m max. 100mA
2. Withstanding voltage No flashover or insulation breakdown 100V AC / 1 minute
3. Capacitance 2pF max. Between adjacent contacts at 1,000Hz (AC voltage)
4. Durability Contact resistance : Rise from initial value of 10m max. 10,000 cycles
5. Total insertion/removal force Insertion force : 35N max., Removal force : 8N min. Mated with corresponding connector
Note1 : Includes temperature rise caused by current flow.
Note2 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
Materials / Finish
Receptacles
Part Material Finish Remarks
Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0
---------------
Contacts Copper alloy Selective gold plated
---------------
Shell Stainless steel Tin alloy plating
Plugs
Part Material Finish Remarks
Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0
---------------
Contacts Copper alloy Selective gold plated
---------------
Shell Stainless steel Tin alloy plating
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Receptacles
qSeries name ZX
ZX 62 RD - B - 5 P * 8
wTermination style 10's : Right-angle PCB wire, SMT
q w e r ty u i 20's : Straight, PCB wire
40's : Direct wire
Plugs 60's : Right-angle, PCB wire
80's : Cradle SMT
eBoard mounting style Blank Standard (Bottom mount)
ZX 40 - B - 5 S * - UNIT
(Receptacles) D Standard (Bottom mount) through hole
q w r ty u o
R Reverse (Top mount)
RD Reverse (Top mount) through hole
M Drop-in (Mid-mount)
ZX 40 - B - SLDA
rMating side configuration A Micro-A
q w r o
B Micro-B
AB Micro-AB
tNumber of contacts 5
yContact type P Receptacle- Male
Interface
Receptacle Plug
S Plug Female
uSerial No.
Micro-A
iShell termination style Blank SMT
Receptacles 8 Through hole (solder tab length: 0.8mm)
Assembly (Insulator/contact/lock)
oComponents-plugs UNIT
Micro-B Cover (Note 1)
Note 1 : Classifiers such as A, B, and C are entered for *.
Micro-AB
2
Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.