1ED31xxMU12H (1ED-X3 Compact) EiceDRIVER 1ED31xxMU12H Compact Datasheet Single-channel 5.7 kV (rms) isolated gate driver IC with active Miller clamp or separate output Feature list Single channel isolated gate driver For use with 600 V/650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs Up to 14.0 A typical peak output current 40 V absolute maximum output supply voltage High common-mode transient immunity CMTI > 200 kV/s Separate source and sink outputs or active Miller clamp with active shutdown and short circuit clamping Galvanically isolated coreless transformer gate driver 3.3 V and 5 V input supply voltage Suitable for operation at high ambient temperature and in fast switching applications UL 1577 certification V = 5.7 kV (rms) for 1 min (File E311313) ISO Potential applications AC and brushless DC motor drives High voltage DC-DC converter and DC-AC inverter Induction heating resonant application UPS-systems Commercial air-conditioning (CAC) Server and telecom switched mode power supplies (SMPS) PG-DSO-8 Solar inverters, e.g. for 1500 V (DC) systems Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Device information Product type Typical output current and UVLO Certification Package configuration (V ) (File E311313) UVLOL2,min 1ED3120MU12H 5.5 A separate source and sink 8.0 V UL PG-DSO-8 1ED3121MU12H 5.5 A separate source and sink 10.5 V UL PG-DSO-8 1ED3122MU12H 10.0 A and 3.0 A clamp 8.0 V UL PG-DSO-8 1ED3123MU12H 14.0 A separate source and sink 8.0 V UL PG-DSO-8 1ED3124MU12H 14.0 A separate source and sink 10.5 V UL PG-DSO-8 1ED3131MU12H 5.5 A separate source and sink, 180 ns 10.5 V UL PG-DSO-8 minimum input pulse suppression time Datasheet Please read the Important Notice and Warnings at the end of this document v2.1 www.infineon.com/gdisolated 2021-03-01 EiceDRIVER 1ED31xxMU12H Compact Datasheet Description Description The 1ED31xxMU12H (1ED-X3 Compact) gate driver ICs are galvanically isolated single channel gate driver ICs for IGBT, MOSFET and SiC MOSFET in PG-DSO-8 package. They provide a typical output current of up to 14.0 A on separate source and sink pins or a typical output current of 10.0 A with an additional 3.0 A active Miller clamp. The input logic pins operate on a wide input voltage range from 3 V to 15 V using CMOS threshold levels to support 3.3 V microcontrollers. Data transfer across the isolation barrier is realized by the coreless transformer technology. All variants have logic input and driver output undervoltage lockout (UVLO), and active shutdown. The gate drivers are certified according to UL 1577 VCC1 VCC2,H OUT+ IN+ Single channel TM EiceDRIVER with separate IN- output OUT- GND1 VEE2,H Control VCC1 VCC2,L OUT+ IN+ Single channel TM EiceDRIVER with separate IN- output OUT- GND1 VEE2,L Figure 1 Typical application using separate output variant Datasheet 2 v2.1 2021-03-01