1ED38x0Mc12M (1ED-X3 Digital) EiceDRIVER 1ED38x0Mc12M Enhanced Datasheet Single-channel 5.7 kV (rms) isolated gate driver IC with I2C configurability for DESAT, Soft-off, UVLO, Miller clamp and optional two-level turn-off Features 650 V, 1200 V, 1700 V, 2300 V IGBTs, SiC, and Si MOSFETs 40 V absolute maximum output supply voltage 3 A, 6 A, and 9 A typical sinking and sourcing peak output current Separate source and sink outputs for hard switching or optional two-level turn-off and with active Miller clamp I2C bus for parameter configuration and status register readout Precise, adjustable, and temperature compensated V detection (DESAT) with fault output CEsat Adjustable IGBT soft turn-off after desaturation detection Operation at high ambient temperature up to 125 C with over-temperature shut down at 160 C (10 C) Tight IC-to-IC propagation delay matching (t = 30 ns) PDD,max Undervoltage lockout protection with hysteresis for input and output side with active shut-down Configurable feedback or fault-off behavior for comparator result of integrated ADC High common-mode transient immunity CMTI = 200 kV/s Small space-saving DSO-16 fine-pitch package with large creepage distance (>8 mm) Safety certification - UL 1577 recognized (File E311313) with V = 6840 V (rms) for 1 s, V = 5700 V (rms) for 60 s ISO,test ISO - IEC 60747-17/VDE 0884-11 approval (pending) with V = 1767 V (peak, reinforced) IORM Additional reference manual available for detailed functional description Potential applications Industrial motor drives - compact, standard, premium, servo drives Solar inverters UPS systems Welding Commercial and agricultural vehicles (CAV) Commercial air-conditioning (CAC) PG-DSO-16 High-voltage isolated DC-DC converters Isolated switch mode power supplies (SMPS) Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Datasheet Please read the Important Notice and Warnings at the end of this document v2.1 www.infineon.com/gdisolated 2021-02-15 EiceDRIVER 1ED38x0Mc12M Enhanced Datasheet Device information Device information Product type Output current Isolation class Marking OPN 1ED3830MC12M 3 A (typ) reinforced 3830MC12 1ED3830MC12MXUMA1 1ED3860MC12M 6 A (typ) reinforced 3860MC12 1ED3860MC12MXUMA1 1ED3890MC12M 9 A (typ) reinforced 3890MC12 1ED3890MC12MXUMA1 1ED3830MU12M 3 A (typ) UL 1577 3830MU12 1ED3830MU12MXUMA1 1ED3860MU12M 6 A (typ) UL 1577 3860MU12 1ED3860MU12MXUMA1 1ED3890MU12M 9 A (typ) UL 1577 3890MU12 1ED3890MU12MXUMA1 Description The 1ED38x0Mc12M family (X3 Digital) consists of galvanically isolated single channel gate driver ICs in a small PG-DSO-16 package with a large creepage and clearance of 8 mm. The gate driver ICs provide a typical peak output current of 3 A, 6 A, and 9 A. Adjustable control and protection functions are included to simplify the design of highly reliable systems. All parameter adjustments are done from the input side via the I2C interface (pin SDA and SCL). All logic I/O pins are supply voltage dependent 3.3 V or 5 V CMOS compatible and can be directly connected to a microcontroller. The data transfer across the galvanic isolation is realized by the integrated coreless transformer technology. VCC1 VCC2,H DESAT,H TM EiceDRIVER ON,H IN,H with digital interface OFF,H RDYC, FLT N CLAMP,H GND2,H I2C GND1 VEE2,H CPU VCC1 VCC2,L DESAT,L TM EiceDRIVER ON,L with digital IN,L interface OFF,L RDYC, FLT N CLAMP,L GND2,L GND1 VEE2,L Figure 1 Typical application Datasheet 2 v2.1 2021-02-15