1EDI60H12AHXUMA1 Infineon

1EDIxxI12AH/1EDIxxH12AH EiceDRIVER 1EDI Compact Single channel IGBT gate driver IC in wide body package Features Single channel isolated IGBT driver For 600 V/650 V/1200 V IGBTs and MOSFETs Up to 10 A typical peak current at rail-to-rail outputs Separate source and sink outputs Galvanically isolated coreless transformer driver Wide input voltage operating range Suitable for operation at high ambient temperature Applications AC and brushless DC motor drives High voltage DC/DC-converter and DC/AC-inverter Induction heating resonant application UPS-systems, welding and solar Product Type Output current configuration Package 1EDI05I12AH 0.5 A PG-DSO-8-59 1EDI20I12AH 2.0 A PG-DSO-8-59 1EDI20H12AH 2.0 A for high speed IGBTs PG-DSO-8-59 1EDI40I12AH 4.0 A PG-DSO-8-59 1EDI60I12AH 6.0 A PG-DSO-8-59 1EDI60H12AH 6.0 A for high speed IGBTs PG-DSO-8-59 Description The 1EDI05I12AH, 1EDI20I12AH, 1EDI40I12AH, 1EDI60I12AH, 1EDI20H12AH and 1EDI60H12AH are VCC1 VCC2,H galvanically isolated single channel IGBT driver in a OUT+ IN+ PG-DSO-8-59 package that provide output currents up TM EiceDRIVER 1EDIxxy12AH IN- to 10 A at separated output pins. OUT- The input logic pins operate on a wide input voltage GND1 GND2,H range from 3 V to 15 V using scaled CMOS threshold Control levels to support even 3.3 V microcontrollers. VCC1 VCC2,L OUT+ Data transfer across the isolation barrier is realized by IN+ the coreless transformer technology. TM EiceDRIVER 1EDIxxy12AH IN- Every driver family member comes with logic input OUT- and driver output undervoltage lockout (UVLO) and GND1 GND2,L active shutdown Datasheet Please read the Important Notice and Warnings at the end of this document Rev. 2.0 www.infineon.com/eicedriver 2016-07-05 EiceDRIVER 1EDI Compact Single channel IGBT gate driver IC in wide body package Table of Contents Table of Contents Features . 1 Applications . 1 Description 1 Table of Contents 2 1 Block Diagram . 3 2 Pin Configuration and Functionality .4 2.1 Pin Configuration . 4 2.2 Pin Functionality 4 3 Functional Description . 6 3.1 Introduction 6 3.2 Supply . 6 3.3 Protection Features . 7 3.3.1 Undervoltage Lockout (UVLO) 7 3.3.2 Active Shut-Down . 7 3.3.3 Short Circuit Clamping . 7 3.4 Non-Inverting and Inverting Inputs 7 3.5 Driver Outputs 8 4 Electrical Parameters .9 4.1 Absolute Maximum Ratings 9 4.2 Operating Parameters 10 4.3 Electrical Characteristics 10 4.3.1 Voltage Supply . 10 4.3.2 Logic Input 11 4.3.3 Gate Driver 12 4.3.4 Short Circuit Clamping 13 4.3.5 Dynamic Characteristics 13 4.3.6 Active Shut Down 14 5 Package Outline .15 6 Application Notes . 16 6.1 Reference Layout for Thermal Data 16 6.2 Printed Circuit Board Guidelines . 16 Revision History 16 Trademarks .17 Datasheet 2 Rev. 2.0 2016-07-05