September, 12th 2011 Automotive grade AUIPS6011(S)(R) INTELLIGENT POWER HIGH SIDE SWITCH Features Product Summary Over temperature shutdown (with auto-restart) Short circuit protection (current limit) Rds(on) 14m max. Reverse battery protection (turns On the MOSFET) Vclamp 39V Full diagnostic capability (short circuit to battery) Active clamp I Limit 60A Open load detection in On and Off state Open load 3V / 2.4A Ground loss protection Logic ground isolated from power ground ESD protection Lead Free and RoHS compliant Packages Description The AUIPS6011(S)(R) is a five terminal Intelligent Power Switch (IPS) for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds the TO-220 DPak D-Pak Tshutdown value. It will automatically restart after the junction AUIPS6011 AUIPS6011S AUIPS6011R has cooled 7C below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground. Typical Connection +5V +Bat Vcc(3) Rdgp Dg(4) Pull-up resistors required for Control open load off and short Rdgs circuit to Vbat detection In(2) Gnd(1) Out(5) V Diag Rin Load Input Signal 1 www.irf.com AUIPS6011(S)(R) Qualification Information Automotive (per AEC-Q100 ) Qualification Level Comments: This family of ICs has passed an Automotive qualification. IRs Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL1, 260C D2PAK-5L (per IPC/JEDEC J-STD-020) Not applicable TO-220 Moisture Sensitivity Level (non-surface mount package style) MSL1, 260C DPAK-5L (per IPC/JEDEC J-STD-020) Class M2 (+/-150V) Machine Model (per AEC-Q100-003) Class H1C (+/-1500V) Human Body Model ( ) per AEC-Q100-002 ESD Charged Device Model Class C4 (+/-900V) (DPAK,D2PAK) (per AEC-Q100-011) Charged Device Model Class C3B (+/-750V) (TO220) (per AEC-Q100-011) Class II, Level A IC Latch-Up Test (per AEC-Q100-004) RoHS Compliant Yes Qualification standards can be found at International Rectifiers web site