AUIPS6041RTRL Infineon

March, 12th 2012 Automotive grade AUIPS6041(G)(R)(S) INTELLIGENT POWER HIGH SIDE SWITCH Features Product Summary Over temperature shutdown (with auto-restart) Short circuit protection (current limit) Rds(on) 130m max. Reverse battery protection (turns On the MOSFET) Full diagnostic capability (short circuit to battery) Vclamp 39V Active clamp I Limit 7A Open load detection in On and Off state Open load 3V / 0.22A Ground loss protection Logic ground isolated from power ground ESD protection Lead Free and RoHS compliant Packages Description The AUIPS6041(G)(R)(S) is a five terminal Intelligent Power Switch (IPS) for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is SO8 D-Pak limited to the Ilim value. The current limitation is activated until AUIPS6041G AUIPS6041R the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7C below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The TO220 D2Pak double level shifter circuitry will allow large offsets between AUIPS6041 AUIPS6041S the logic and load ground. Typical Connection +5V +Bat Vcc(5-6-7-8) Rdgp Dg(3) Pull-up resistors required for Control open load off and short Rdgs circuit to Vbat detection In(2) Gnd(1) Out(4) V Diag Rin Load Input Signal 1 www.irf.com AUIPS6041(G)(R)(S) Qualification Information Automotive (per AEC-Q100 ) Qualification Level Comments: This family of ICs has passed an Automotive qualification. IRs Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL1, 260C D2PAK-5L (per IPC/JEDEC J-STD-020) Not applicable TO-220 (non-surface mount package style) Moisture Sensitivity Level MSL1, 260C DPAK-5L (per IPC/JEDEC J-STD-020) MSL2, 260C SOIC-8L (per IPC/JEDEC J-STD-020) Class M2 (+/-150V) Machine Model (per AEC-Q100-003) Class H1C (+/-1500V) Human Body Model ( ) per AEC-Q100-002 ESD Charged Device Model Class C4 (+/-900V) (SOIC, DPAK,D2PAK) (per AEC-Q100-011) Charged Device Model Class C3B (+/-750V) (TO220) (per AEC-Q100-011) Class II, Level A IC Latch-Up Test (per AEC-Q100-004) RoHS Compliant Yes Qualification standards can be found at International Rectifiers web site