November, 14th 2010 Automotive grade AUIR3316(S) LOW EMI CURRENT SENSE HIGH SIDE SWITCH Features Product Summary Load current feedback Rds(on) 7 m max. Programmable over current shutdown Vcc op. 6 to 26V Active clamp ESD protection Current Ratio 8800 Input referenced to Vcc Prog. Ishutdown 10 to 90A Over temperature shutdown Vclamp 40V Switching time optimized for low EMI Reverse battery protection Packages Description The AUIR3316(S) is a fully protected 4 terminals high side switch. The input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified threshold, the output power Mosfet is turned on. When the Vcc - Vin is lower than the specified Vil threshold, the output Mosfet is turned off. A current proportional to the TO-220 DPak power Mosfet current is sourced to the Ifb pin. Over AUIR3316 Pin 4 and 5 fused current shutdown occurs when Vifb-Vin > 4.7V. The AUIR3316S current shutdown threshold is adjusted by selecting the proper RIfb. Either over current and over temperature latches off the switch. The device is reset by pulling the input pin high. Other integrated protections (ESD, reverse battery, active clamp) make the switch very rugged in automotive environment. Typical Connection Vcc AUIR3316 IN Battery Ifb Out Current feeback 10k Input Load Rifb On Logic Power Off Ground Ground 1 www.irf.com AUIR3316(S) Qualification Information Automotive (per AEC-Q100 ) Qualification Level Comments: This family of ICs has passed an Automotive qualification. IRs Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL1, 260C D2PAK-5L (per IPC/JEDEC J-STD-020) Moisture Sensitivity Level TO220-5L Not applicable Class M4 (450V) Machine Model (per AEC-Q100-003) Class H3A (4,500 V) ESD Human Body Model ( ) per AEC-Q100-002 Class C4 (1000 V) Charged Device Model (per AEC-Q100-011) Class II, Level A IC Latch-Up Test (per AEC-Q100-004) RoHS Compliant Yes Qualification standards can be found at International Rectifiers web site