BGA8U1BN6E6327XTSA1 Infineon

BGA8U1BN6 BGA8U1BN6 Low Noise Amplifier for Ultra High Band 4-6GHz (f.e. LTE - U/ LAA with bypass) Features Operating frequencies: 4.0 - 6.0 GHz Insertion power gain: 13.7 dB Insertion Loss in bypass mode: 7.5 dB Low noise figure: 1.6 dB Low current consumption: 4.5 mA Multi-state control: OFF-, bypass- and high gain-Mode 2 0.7 x 1.1 mm Ultra small TSNP-6-2 leadless package RF input and RF output internally matched to 50 Ohm, no external components necessary Application The LTE data rate can be significantly improved by using the Low Noise Amplifier. The integrated bypass function increases the overall system dynamic range and leads to more flexibility in the RF front-end. In high gain mode the LNA offers best Noise Figure to ensure high data rates even on the LTE cell edge. Closer to the basestation the bypass mode can be activated reducing current consumption. The BGA8U1BN6 is designed for the inlicensed LTE spectrum (4-6GHz) part of the 3GPP Release 13. Product Validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Block diagram VCC GPIO1 GPIO2 AI AO ESD GND BGA8U1BN6 Blockdiagram.vsd Data Sheet Revision 3.1 www.infineon.com 2017-09-14 BGA8U1BN6 Low Noise Amplifier for Ultra High Band 4-6GHz (f.e. LTE - U/ LAA with bypass) Table of Contents Table of Contents Table of Contents 2 1 Features . 3 2 Maximum Ratings . 5 3 Electrical Characteristics . 6 4 Application Information 7 5 Package Information . 8 Data Sheet 2 Revision 3.1 2017-09-14