CDM10V Flexible 0-10V Dimming Solution Features Simplest 0-10 V design on the market. CDM10V comes with default settings: - 5% minimum duty cycle - 1kHz PWM frequency - 200A Dimmer/Resistor Bias current - Dim-To -Off disabled The simple one time programmable option allows setting in a wide range: - Minimum duty cycle: 1%, 2%, 5%, 10% - PWM output frequency: 200Hz, 500Hz, 1kHz, 2kHz - Dimmer/Resistor Bias Current: 50A, 100A, 200A, 500A - Dim-to -Off: disabled/enabled Wide input V range from 11 to 25 V cc Transparent PWM mode (PWM Bypass Mode in DIM-TO-OFF enabled mode) Replaces many external components with a single chip reducing BOM and PCB space Minimum variation from device to device Applications LED Drivers needing 0-10 V Dimming Circuits Industrial and Commercial Dimmable Applications: Luminaires, Troffers, Downlights, Sconces, Undercabinet, Office Lighting, Signage applications, Dali applications Product Type Package CDM10V SOT23-6 Description CDM10V is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many components in a traditional solution and reduces BOM and PCB space significantly. The CDM10V IC outputs a 0 - 100% PWM current signal at programmable frequency with an amplitude value of 5 mA. The duty cycle of the PWM signal can be limited to a dedicated minimum value. Dim-to -off feature is supported as well and can be enabled on demand. Embedded digital signal processing maintains minimum variations from device to device. Please read the Important Notice and Warnings at the end of this document v 1.3 www.infineon.com 2017-01-27CDM10V Flexible 0-10V Dimming Solution Table of contents Table of contents Features . 1 Applications 1 Description .1 Table of contents . 2 1 Block Diagram 3 2 Pin Configuration .3 3 Functional Description 4 4 Electrical Characteristics and Parameters .13 5 Chip Configuration 15 6 Package Dimensions . 17 7 References 19 Revision History . 19 Trademarks . 20 2 v 1.3 2017-01-27