Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com PSoC 3: CY8C36 Family Datasheet Programmable System-on-Chip (PSoC ) General Description PSoC 3 is a true programmable embedded system-on-chip, integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The PSoC 3 architecture boosts performance through: 8051 core plus DMA controller and digital filter processor, at up to 67 MHz Ultra low power with industry s widest voltage range Programmable digital and analog peripherals enable custom functions Flexible routing of any analog or digital peripheral function to any pin PSoC devices employ a highly configurable system-on-chip architecture for embedded control design. They integrate configurable analog and digital circuits, controlled by an on-chip microcontroller. A single PSoC device can integrate as many as 100 digital and analog peripheral functions, reducing design time, board space, power consumption, and system cost while improving system quality. Features Operating characteristics Analog peripherals Voltage range: 1.71 to 5.5 V, up to six power domains Configurable 8- to 12-bit delta-sigma ADC 1 Temperature range (ambient) 40 to 85 C Up to four 8-bit DACs DC to 67-MHz operation Up to four comparators Power modes Up to four opamps Active mode 1.2 mA at 6 MHz, and 12 mA at 48 MHz Up to four programmable analog blocks, to create: 1-A sleep mode Programmable gain amplifier (PGA) 200-nA hibernate mode with RAM retention Transimpedance amplifier (TIA) Boost regulator from 0.5-V input up to 5-V output Mixer Sample and hold circuit Performance CapSense support, up to 62 sensors 8-bit 8051 CPU, 32 interrupt inputs 1.024 V 0.1% internal voltage reference 24-channel direct memory access (DMA) controller 24-bit 64-tap fixed-point digital filter processor (DFB) Versatile I/O system 29 to 72 I/O pins up to 62 general-purpose I/Os (GPIOs) Memories Up to eight performance I/O (SIO) pins Up to 64 KB program flash, with cache and security features 25 mA current sink Up to 8 KB additional flash for error correcting code (ECC) Programmable input threshold and output high voltages Up to 8 KB RAM Can act as a general-purpose comparator Up to 2 KB EEPROM Hot swap capability and overvoltage tolerance Digital peripherals Two USBIO pins that can be used as GPIOs Up to four 16-bit timer, counter, and PWM (TCPWM) blocks Route any digital or analog peripheral to any GPIO 2 I C, 1 Mbps bus speed LCD direct drive from any GPIO, up to 46 16 segments USB 2.0 certified Full-Speed (FS) 12 Mbps peripheral CapSense support from any GPIO 2 interface (TID 40770053) using internal oscillator 1.2-V to 5.5-V interface voltages, up to four power domains Full CAN 2.0b, 16 Rx, 8 Tx buffers Programming and debug 16 to 24 universal digital blocks (UDB), programmable to JTAG (4-wire), serial wire debug (SWD) (2-wire), and single create any number of functions: wire viewer (SWV) interfaces 8-, 16-, 24-, and 32-bit timers, counters, and PWMs 2 2 Bootloader programming through I C, SPI, UART, USB, and I C, UART, SPI, I2S, LIN 2.0 interfaces other interfaces Cyclic redundancy check (CRC) Pseudo random sequence (PRS) generators Package options: 48-pin SSOP, 48-pin QFN, 68-pin QFN, 100-pin TQFP, and 72-pin WLCSP Quadrature decoders Gate-level logic functions Development support with free PSoC Creator tool Schematic and firmware design support Programmable clocking Over 100 PSoC Components integrate multiple ICs and 3- to 62-MHz internal oscillator, 1% accuracy at 3 MHz system interfaces into one PSoC. Components are free 4- to 25-MHz external crystal oscillator embedded ICs represented by icons. Drag and drop Internal PLL clock generation up to 67 MHz component icons to design systems in PSoC Creator. Low-power internal oscillator at 1, 33, and 100 kHz Includes free Keil 8051 compiler 32.768-kHz external watch crystal oscillator Supports device programming and debugging 12 clock dividers routable to any peripheral or I/O Notes 1. The maximum storage temperature is 150 C in compliance with JEDEC Standard JESD22-A103, High Temperature Storage Life. 2. This feature on select devices only. See Ordering Information on page 120 for details. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-53413 Rev. AA Revised December 3, 2019