AMENDMENT lanSC520 Microcontroller Datasheet This document amends the lanSC520 Microcontroller Datasheet, order 22003B. DOCUMENTATION DEFECTS AND CORRECTIONS The following corrections apply: On page 48, in the heading Operating Ranges At Commercial Temperatures, change Commercial On page 2 of the datasheet, add a new temperature to Commercial and Industrial. range: Also on page 48, add a new operating range param- I = Industrial (T = 40C to +85C) A eter, T , for industrial ambient temperature. AMBIENT where: T = ambient temperature A Minimum value: 40C. Maximum value: +85C Also on page 2, add a new row to the Valid Combi- On page 50, in the heading DC Characteristics nations table. The complete revised table is repro- over Commercial Operating Ranges, change duced here: Commercial to Commercial and Industrial. On page 56, in the section titled Thermal Charac- Valid Combinations teristics, change The lanSC520 microcontroller lanSC520100 is... to lanSC520 microcontroller commercial AC lanSC520133 temperature devices are... in the first sentence. lanSC520100 AI On page 57, replace Table 15 with the updated ver- sion reproduced below. This new table adds a new row for T = 100C. CASE On page 59, in the heading Switching Characteris- tics over Commercial Operating Ranges, change Commercial to Commercial and Industrial. 1 Table 15. Maximum T for Plastic BGA Package with 6-Layer Board A Airflow (Linear Feet Per Minute) T CPU Clock Rate CASE 0 200 400 600 800 85C 133 MHz 67.3C69.8C71.3C72.2C72.7C 100 MHz 70.1C72.2C73.5C74.3C74.7C 2 100C 100 MHz 85.1C87.2C88.5C89.3C89.7C Notes: 1. The board type is described in the JEDEC standards document entitled Thermal Test Chip Guide- line (Wire Bond Type Chip) at www.jedec.org. On the home page click on the link Free Standards and Docs, and then click on the document link JESD51-4 under JEDEC PUBLICATIONS. 2. T = 100C data is for industrial temperature devices only. CASE Publication 22003 Rev: B Amendment/1 Copyright 2001 Advanced Micro Devices, Inc. All rights reserved. Issue Date: May 2001 AM E N DM E N T Trademarks AMD, the AMD logo, and combinations thereof, and lan are trademarks of Advanced Micro Devices, Inc. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. Disclaimer The contents of this document are provided in connection with Advanced Micro Devices, Inc. (AMD) products. AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to speci- fications and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any in- tellectual property rights is granted by this publication. Except as set forth in AMD s Standard Terms and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. AMD s products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD s product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. 2lanSC520 Microcontroller Datasheet Amendment