Technical Information MIP AQ serve IFS100V12PT4 preliminary data Key data Power module using IGBT4 technology in sixpack configuration. Isolated IGBT driver, protection and temperature sensor included. Topology B6I Rated semiconductor data 1200V, 100A Load type Inductive, resistive Industrial drives, UPS, solar Typical applications inverters, auxiliary inverters temperature, short circuit, Sensors and protection signal transmission, UVLO for all power supplies Electrical, 5V-CMOS, Interface IGBT Galvanic Isolation according to IEC61800-5-1 Standards IEC61800-5-1, UL94, RoHS prepared by: PK date of publication: 2012-05-25 approved by: KS revision: 2.1 Technical Information MIP AQ serve IFS100V12PT4 preliminary data Electrical data power part min typ max L = 30nH s DC link voltage -40 < T < 150C U 850 V vj DC 0 < I < 2*I C turn off C max IGBT continuous DC collector T = 100C case I 100 A C nom current T = T vj vjop max IGBT collector-emitter voltage T =25C U 1200 V vj CES IGBT collector-emitter T =25C I =100A 1,75 2,15 vj C U V CEsat saturation voltage T =150C I =100A 2,10 vj C Diode repetitive peak reverse T =25C U 1200 V vj RRM voltage T =25C I =100A 1,70 2,15 vj C Diode forward voltage U V F T =150C I =100A 1,65 vj C Operating junction temperature IGBT and Diode T 150 C vjop IGBT, U =600V, I =100A DC C Turn on energy loss per pulse E 10,2 mJ on T =150C, di/dt,= 1,8kA/s vj IGBT, U =600V, I =100A DC C Turn off energy loss per pulse E 8,0 mJ off Tvj=150C, du/dt = 3,6kV/s Diode, U =600V, I =100A DC F Reverse recovery energy E 8,0 mJ rec T =150C, di/dt = 1,8kA/s vj Electrical data control part Auxiliary power supply: IGBT Gate (on X1) min typ max Voltage U 13 16 18 V GS P1,2,3,4 IGBT driver positive supply Current at f = 20kHz, IGS P1,2,3 14 mA sw U = +15V, GSP1,2,3 T = 25C vj I 26 mA GS P4 Voltage U -10 -8 -5 V GS N1,2,3,4 IGBT driver negative supply I 13 mA Current f = 20kHz, GS N1,2,3 sw U = -8V, GSN T = 25C vj I 18 mA GS N4 IGBT driver undervoltage lockout For each channel U 10,4 12,6 V GS UVLO threshold IGBT driver undervoltage lockout For each channel U 0,7 V GS UVLO H hysteresis Auxiliary power supply: Logic (on X2) min typ max Voltage U 4,5 5 5,5 V LS Logic power supply Current fsw = 20kHz, I 55 mA LS U = +5V LS Logic power supply undervoltage U 3,5 4,3 V LS UVLO lockout threshold Logic power supply undervoltage U 0,3 V LS UVLO H lockout hysteresis prepared by: PK date of publication: 2012-05-25 approved by: KS revision: 2.1