IFX20001 Low Dropout Voltage Regulator IFX20001MBV33 IFX20001MBV50 Data Sheet Rev. 1.1, 2013-01-08 Standard Power Low Dropout Voltage Regulator IFX20001 1Overview Features Two output voltage versions: 3.3 V, 5.0 V Low drop voltage 300 mV over the full temperature range Output current: 30 mA Inhibit function Low quiescent current Input voltage up to 45 V Wide temperature range: -40C T 125C j Output protected against short circuit PG-SCT595-5 Over temperature protection Reverse polarity protection Very small and thermally enhanced package Green Product (RoHS compliant) Applications Manufacturing Automation Appliances Network Routers The IFX20001 is not qualified and manufactured according to the requirements of Infineon Technologies with regards to automotive and/or transportation applications. For automotive applications please refer to the Infineon TLx (TLE, TLS, TLF.....) voltage regulator products. Description The IFX20001 is a monolithic integrated low drop voltage regulator in a very small SMD package PG-SCT595-5. It is designed to supply various loads (e.g. micro controllers, sensors, or as standby supply, etc) under severe conditions. Therefore the device is equipped with additional protection functions against overload, short circuit and reverse polarity. In case of an over temperature condition the regulator is automatically turned off by the integrated thermal protection circuit. Input voltages up to 40 V are regulated to V = 3.3 V (V33 version) or 5.0 V (V50 version). The output is able Q,nom to drive a load of 30 mA while it regulates the output voltage within a 4% accuracy. To save energy the device can be switched to stand-by mode via an inhibit input which causes the current consumption to drop below 5 A. Type Package Marking IFX20001MBV33 PG-SCT595-5 V3 IFX20001MBV50 PG-SCT595-5 V5 Data Sheet 2 Rev. 1.1, 2013-01-08