IFX20002 Low dropout voltage regulator Features Two output voltage versions: 3.3 V, 5.0 V Low drop voltage 300 mV over the full temperature range Output current: 30 mA Inhibit function Low quiescent current Stable with ceramic output capacitor Input voltage up to 45 V Wide temperature range: T = -40C to +125C j Output protected against short circuit Overtemperature protection Reverse polarity protection Very small and thermally enhanced package Green Product (RoHS compliant) Potential applications Manufacturing automation Appliances Network routers The IFX20002 is not qualified and manufactured according to the requirements of Infineon Technologies with regards to automotive and/or transportation applications. For automotive applications please refer to the Infineon TLx (TLE, TLS, TLF, ...) voltage regulator products. Product validation Qualified for industrial applications according to the relevant tests of JEDEC. Description The IFX20002 is a monolithic integrated low drop voltage regulator in very small SMD package PG-SCT595-5. It is designed to supply various loads (e.g. microcontrollers, sensors, or as stand-by supply, etc.) under severe conditions. Therefore the device is equipped with additional protection functions against overload, short circuit and reverse polarity. In case of an overtemperature condition the regulator is automatically turned off by the integrated thermal protection circuit. Datasheet Rev. 1.10 www.infineon.com/industrial-voltage-regulators 1 2021-05-11 IFX20002 Low dropout voltage regulator Input voltages up to 40 V are regulated to V = 3.3 V (V33 version) or 5.0 V (V50 version). The output is able Q,nom to drive a load of 30 mA while it regulates the output voltage within a 4% accuracy. To save energy the device can be switched to stand-by mode via an inhibit input which causes the current consumption to drop below 5A. Type Package Marking IFX20002MBV33 PG-SCT595-5 E3 IFX20002MBV50 PG-SCT595-5 E5 Datasheet 2 Rev. 1.10 2021-05-11