IMM100 series - iMOTION Smart IPM for motor control iMOTION IMM101T/IMM102T - Smart IPM for motor control Fully integrated high-performance turnkey motor control system Quality requirement category: Industry IMM101T/IMM102T series is a family of fully-integrated, turnkey high-voltage Motor Drive Module designed for high-performance, high-efficiency PMSM/BLDC motor drive applications such as fans, pumps and compressors. It integrates Infineons Advanced Motion Control Engine (MCE), gate driver and six power MOSFETs in a single 12x12mm package. Feature list Motion control engine (MCE) as ready-to-use controller solution for variable speed drives Field oriented control (FOC) for permanent magnet synchronous motor (PMSM) Space vector PWM with sinusoidal commutation and integrated protection features Current sensing via single or leg shunt through direct interface Sensorless operation Integrated analog comparators for over-current protection Built-in temperature sensor 3.3V or 5.0V supply voltage options for controller 15V supply voltage for gate driver 3 different power MOSFET options: 6/500V, 1.4/650V and 0.95/650V Integrated bootstrap FET Support for hall sensors Boost PFC control (IMM102T only) Flexible host interface options for speed commands: UART, PWM or analog signal Support for IEC 60335 (Class B) Isolation 1500V 1min RMS Very compact 12x12mm PQFN package Applications Fans Pumps Compressors Datasheet 4-24-2020 V1.2 IMM100 series - iMOTION Smart IPM for motor control IMM100 series description IMM101T/IMM102T devices belong to IMM100 series of iMOTION Smart IPMs. IMM100 series is a family of fully- integrated, programmable or configurable (turnkey) high-voltage Motor Drive Modules designed for high- performance, high-efficiency PMSM (BLDC) motor drive applications such as fans, pumps and compressors. It integrates a controller, a gate driver and six power MOSFETs. IMM100 series is available in two variants: A-variant and T-variant. A-variant (IMM100A-xxx) includes a fully programmable ARM Cortex -M0 controller, while T- variant (IMM10xT-xxx) features the Infineons patented Motion Control Engine (MCE). Both variants offer different control configuration options for PMSM motor-drive system in a compact 12x12mm surface-mount package which minimizes external components count and PCB area. This thermally enhanced package provides excellent thermal performance working with or without heatsink. The package features a 1.3mm creepage distance between the high-voltage pads beneath the package to ease the surface mounting with standard SMT process and increase the robustness of the system. IMM100 series integrates either 500V FredFET or 650V CoolMOS and the industry benchmark 3-phase high-voltage, rugged gate driver with integrated bootstrap functionality. Depending on the power MOSFETs employed in the package, IMM100 series covers applications with a rated output power from 25W to 80W with 500V/600V maximum DC voltage. In the 600V versions, the Power MOS technology is rated 650V, while the gate driver is rated 600V, which determines the maximum allowable DC voltage of the system. Ordering information IMM100T devices integrate an MCE for the control of variable speed drives. By integrating both the required hardware and software to perform control of a permanent magnet synchronous motor (PMSM) they provide the shortest time to market for any motor system at the lowest system and development cost. Product type Application Output Rating R Typ DS(ON) IMM101T-015M Single Motor Control 500V / 1A 4.8 IMM101T-046M Single Motor Control 600V / 4A 1.26 IMM101T-056M Single Motor Control 600V / 4A (optimized for low- 0.86 frequency operation) IMM102T-015M Single Motor Control + Boost PFC 500V / 1A 4.8 IMM102T-046M Single Motor Control + Boost PFC 600V / 4A 1.26 IMM102T-056M Single Motor Control + Boost PFC 600V / 4A (optimized for low- 0.86 frequency operation) Datasheet 4-24-2020 V1.2