IR3883MTRPBF Infineon

IR3883 800kHz 3A EaSy SupIRBuck Synchronous Buck Regulator Datasheet Rev 3.1, 09/07/2021 Power Management & MultimarketIR3883 SupIRBuck Synchronous Buck Regulator Product Overview 1 Product Overview Features Description Wide Input Voltage Range (2.5V-14V) with an The IR3883 SupIRBuck is an easy-to-use, fully external Vcc integrated and highly efficient monolithic DC/DC Single Input Voltage Range (4.5V to 14V) regulator. The on-chip PWM controller and Continuous 3A Load Capability MOSFETs make IR3883 a space-efficient solution, 800kHz Switching Frequency providing accurate power delivery. The IR3883 employs an Enhanced Stability (EaSy) engine that 10uA Supply Current at Shutdown makes it stable with ceramic capacitors without EaSy SupIRBuck engine Stable with Ceramic compensation. Capacitors and no External Compensation IR3883 can operate in Forced Continuous Enhanced Light Load Efficiency with Reduced Conduction Mode (FCCM) or can enter Diode Switching Frequency and Diode Emulation Emulation mode during light loads to save power. Forced Continuous Conduction Mode Option With ultra-light loads, IR3883 can enter a low quiescent current mode making it ideal for Standby Thermally Compensated Peak Over-Current power supplies. Protection with three selectable levels It features important protection functions, such as Internal Soft-Start Pre-bias startup, internal soft-start, hiccup over- Enable Input current protection and thermal shutdown to give Pre-bias Start Up required system level security in the event of fault Thermal Shut Down conditions. Power Good Output Applications Precision Reference Voltage (0.5V+/-0.6%) Server and Computing Small Size 3mmx3mm QFN Storage Applications Lead-free, Halogen-free and RoHS6 Compliant Communications Infrastructure General DC-DC Converters Distributed Point of Load Power Architectures Table 1-1 Ordering Information Part Number Package Type Standard Pack Part Number Form Quantity IR3883 PQFN 3 mm x 3 mm Tape and Reel 3000 IR3883MTRPBF Figure 1-1 IR3883 Part Number Configuration Code Datasheet 2 Rev 3.1 09/07/2021