IR4428STRPBF Infineon

Data Sheet No. PD60177 Rev. F IR4426/IR4427/IR4428(S) & (PbF) DUAL LOW SIDE DRIVER Features Product Summary Gate drive supply range from 6 to 20V CMOS Schmitt-triggered inputs Matched propagation delay for both channels I +/- 1.5A / 1.5A O Outputs out of phase with inputs (IR4426) Outputs in phase with inputs (IR4427) V 6V - 20V OUT OutputA out of phase with inputA and OutputB in phase with inputB (IR4428) t (typ.) 85 & 65 ns on/off Also available LEAD-FREE Descriptions The IR4426/IR4427/IR4428 (S) is a low voltage, Packages high speed power MOSFET and IGBT driver. Pro- prietary latch immune CMOS technologies en- able ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for mini- mum driver cross-conduction. Propagation delays between two channels are matched. 8 Lead PDIP 8 Lead SOIC Typical Connection 1 8 NC NC TO 2 7 INA OUTA LOAD IR442x 3 6 GND Vs 4 5 INB OUTB www.irf.com 1IR4426/IR4427/IR4428(S) & (PbF) ADVANCE INFORMATION Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage param- eters are absolute voltages referenced to GND. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units V Fixed supply voltage -0.3 25 S V V Output voltage -0.3 V + 0.3 O S V Logic input voltage -0.3 V + 0.3 IN S P Package power dissipation T +25C (8 Lead PDIP) 1.0 D A W (8 lead SOIC) 0.625 Rth Thermal resistance, junction to ambient (8 lead PDIP) 125 JA C/W (8 lead SOIC) 200 T Junction temperature 150 J C T Storage temperature -55 150 S T Lead temperature (soldering, 10 seconds) 300 L Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to GND. Symbol Definition Min. Max. Units V Fixed supply voltage 6 20 S V V Output voltage 0 V O S V Logic input voltage 0 V IN S C T Ambient temperature -40 125 A DC Electrical Characteristics V (V ) = 15V, T = 25C unless otherwise specified. The V , and I parameters are referenced to GND and are BIAS S A IN IN applicable to input leads: INA and INB. The V and I parameters are referenced to GND and are applicable to the O O output leads: OUTA and OUTB. Symbol Definition Min. Typ. Max. Units Test Conditions V Logic 0 input voltage (OUTA=LO, OUTB=LO) 2.7 IH (IR4426) Logic 1 input voltage (OUTA=HI, OUTB=HI) V (IR4427) Logic 0 input voltage (OUTA=LO), Logic 1 input voltage (OUTB=HI) (IR4428) www.irf.com 2