Datasheet, Version 2.3, September 2009 TM ISOFACE ISO1H801G Coreless Transformer Isolated Digital Output 8 Channel 0.625A High-Side Switch Power Management & Drives Nev e r sto p thi n ki ng. ISO1H801G Revision History: 2009-09-16 Version 2.3 Previous Version: V2.2 V2.0 Final Datasheet V2.1 Final Datasheet Page 15 creepage, clearance distance and V adapted, V2.2 ISO Diagnostic output discontinued V2.3 Edition 2009-09-16 Published by Infineon Technologies AG, Am Campeon 1-12, 85579 Neubiberg, Germany Infineon Technologies AG 2009. All Rights Reserved. Attention please The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.