Errata Sheet Rel. 1.4, 25.01.2011 Device TC1797 Marking/Step QS-AC Package P/PG-BGA-416-10 01961AERRA This Errata Sheet describes the deviations from the current user documentation. Table 1 Current Documentation TC1797 Users Manual V1.1 May 2009 TC1797 Data Sheet V1.2 September 2009 TriCore 1 Architecture V1.3.8 January 2008 Make sure you always use the corresponding documentation for this device (Users Manual, Data Sheet, Documentation Addendum (if applicable), TriCore Architecture Manual, Errata Sheet) available in category Documents at www.infineon.com/TC1797. Each erratum identifier follows the pattern Module Arch.TypeNumber: Module: subsystem, peripheral, or function affected by the erratum Arch: microcontroller architecture where the erratum was firstly detected AI: Architecture Independent CIC: Companion ICs TC: TriCore X: XC166 / XE166 / XC2000 Family XC8: XC800 Family none : C166 Family Type: category of deviation none : Functional Deviation P: Parametric Deviation H: Application Hint TC1797, QS-AC 1/115 Rel. 1.4, 25.01.2011Errata Sheet D: Documentation Update Number: ascending sequential number within the three previous fields. As this sequence is used over several derivatives, including already solved deviations, gaps inside this enumeration can occur. Note: Devices marked with EES or ES are engineering samples which may not be completely tested in all functional and electrical characteristics, therefore they should be used for evaluation only. Note: This device is equipped with a TriCoreTC1.3.1 Core. Some of the errata have workarounds which are possibly supported by the tool vendors. Some corresponding compiler switches need possibly to be set. Please see the respective documentation of your compiler. For effects of issues related to the on-chip debug system, see also the documentation of the debug tool vendor. The specific test conditions for EES and ES are documented in a separate Status Sheet. TC1797, QS-AC 2/115 Rel. 1.4, 25.01.2011