Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com S6BT112A01/S6BT112A02 ASSP CXPI Transceiver IC f or Automotive Network The S6BT112A01 and S6BT112A02 are integratedtran sceiver ICs for automotive communication network with Clock Extension Peripheral Interface (CXPI). Ihat s a flexible bit rateran ging from 2.4 kbps to 20kbp s and is JASO CXPI compliant. This CXPI transceiver IC connects the CXPI data link controller and the CXPI Bus line, and enabledisrect connection to the vehicle battery with a high surge protectionAd. ditionally, S6BT112A01 have an optional Spread Spectrum Clock Generator (SSCG) function, which is effective at master nod. Deuring Sleep mode, S6BT112A01 and S6BT112A0red2 uce power consumption. The CXPI transceiver IC supports master node and slave no, whicde h is set by SELMS pins. Features Compliant with the JASO CXPI (JASO D 01-53: 2015) Low-voltage detection standard Supports Sleep and Wakeup modes Compliant withthe SAE CXPI ( J3076 201510) standard Sleep mode curren t:6 A (typical at Slave) Supports 2.4 kbps to 20 kbps bitrate Halogen-free 8-pin SOIC package Waveshaping for low Electromagnetic Interference (EMI) ESD protection HBM (1.5 k, 100 pF) 8 kV (BUS pin, BAT Operating voltage range: 5.3 V to 18 V pin) Direct battery operation with protection against load dump, Voltage tolerance 40 V (BUS pin ) jump start, and transients S6BT112A01: With SSCG BUS short to VBAT overcurrent protection S6BT112A02: Without SSCG Loss of ground protectio nBUS pin leakage is lower than AEC-Q100 compliant (Grade-1) 1 mA Application Notes: AN227376 - Getting Started with CXPI Easy selection of master node or slave no de Transceiver S6BT112A Overtemperature protection S6BT112A Block Diagram Cypress Semiconductor Corporation 198 Champion Court Sa, n JoCA 95se134-1709 -943 40-268 00 Document Number: 002-10203 Rev. *G Revised June 28, 2020