TLE4476DATMA2 Infineon

Dual Low Drop Voltage Regulator TLE 4476 Features Output 1: 350 mA 3.3 V 4% Output 2: 430 mA 5.0 V 4% Enable input for output 2 Low quiescent current in OFF state Wide operation range: up to 42 V P-TO252-5-11 Reverse battery protection: up to 42 V Output protected against short circuit Wide temperature range: -40 C to 170 C Overvoltage protection up to 65 V (< 400 ms) Overtemperature protection Overload protection Green Product (RoHS compliant) AEC Qualified Functional Description The TLE 4476 is a monolithic integrated voltage regulator providing two output voltages, Q1 is a 3.3 V output for loads up to 350 mA and Q2 is a 5 V output providing 430 mA. The device is available in the PG-TO252-5-11 (D-Pak) package. Output 2 can be switched ON/OFF via the Enable input EN. The TLE4476 is designed to supply microprocessor systems under the severe conditions of automotive applications and is therefore equipped with additional protection functions against overload, short circuit and overtemperature. Type Package TLE 4476 D PG-TO252-5-11 Data Sheet 1 Rev. 2.5, 2007-03-20 TLE 4476 PG-TO252-5 GND 15 EN Q1 Q2 AEP02562 Figure 1 Pin Configuration (top view) Table 1 Pin Definitions and Functions Pin No. Symbol Function 1I Input voltage block to GND directly at the IC with a ceramic capacitor 2Q1 3.3 V output block to GND with a capacitor C 10 F, Q1 ESR < 2 at 10 kHz 3GND Ground 4Q2 5.0 V output block to GND with a capacitor C 10 F, Q2 ESR < 3 at 10 kHz 5EN Enable input to switch ON and OFF Q2, ON with high signal Data Sheet 2 Rev. 2.5, 2007-03-20