TLE4988CXTNM28HAMA1 Infineon

TLE4988C Technical Product Description Programmable True Power On Camshaft Sensor About this Document High-level description of the product features and technical characteristics as primary information about the functionality of the TLE4988C High End Camshaft Speed Sensor. Product Description The TLE4988C is an active Hall sensor ideally suited for camshaft applications and similar industrial applications, such as speedometer. It provides true power on (TPO) functionality from zero speed and maps the mechanical shape of a target wheel, such as either a tooth or a notch into a unique electrical output state. Variants of self-calibration algorithms are implemented, adaptable to common camshaft targets in order to achieve optimum phase accuracy in operation. TPO capability and cancelation of production spread and assembly tolerance can be achieved by end of line programming. Features Mono-cell chopped Hall switching sensor to measure speed or phase of tooth/pole wheels Digital output signal (voltage interface) with enhanced micro break feature True Power On functionality (TPO) with optional automatic TPO adaption in EEPROM Configurable algorithms in EEPROM, incl. Individual Switching Threshold with vibration suppression End-of-line programmable switching points (k-factor), options for hidden, visible and adaptive switching hysteresis, programmable delay time Temperature coefficient of back-bias magnet pre-programmed High immunity against ESD, EMC and mechanical stress 3-pin package PG-SSO-3-52. Twist insensitive mounting (TIM). AEC-Q100 Automotive qualified High speed digital diagnosis test interface Ordering Information Table1 Version Type Marking Ordering Code Package Temp. trimming TLE4988C-XTF-M28 88AAC1 SP005073030 PG-SSO-3-52 Ferrite TLE4988C-XTN-M28 88AAC2 SP005072956 PG-SSO-3-52 NdFeB TLE4988C-XTS-M28 88AAC3 SP001040468 PG-SSO-3-52 SmCo Technical Product Description 1 Revision 1.0 www.infineon.com 2020-03-20 TLE4988C Programmable True Power On Camshaft Sensor Application Description The TLE4988C comes in a RoHs compliant three-pin package, qualified for automotive usage. It has two integrated capacitors on the lead frame (220 nF/1.8 nF). These capacitors increase the EMC robustness of the device. In 12 V applications it is further recommended to use a serial resistor R (dependent on EMC Supply requirement 47 to 100 ) for protection on the supply line. A pull-up resistor R determines the maximum Load current flowing through the output transistor, 1.2 k is recommended. Option for 12V I V S Out S PG-SSO-3-52 1 R Supply R V S AC Load 1.2 k V S I Out C Vs 3 Out C Ou t GND C = 220 nF Vs V Out C = 1.8 nF Ou t ...integrated in package 2 Figure1 Typical Application Circuit Pin Configuration Table2 Pin Description Pin Number Symbol Function 1V (V ) Supply Voltage S DD 2GND Ground 3V (Q) Open Drain Output OUT Technical Product Description 2 Revision 1.0 2020-03-20